The Traverse command adds two points to the traverse - an Occupied/Foresight Point and Backsight Point. Once the points have been added, you can enter coordinates for the added points or recall existing points. The Traverse command saves your key strokes by adding the points and presetting their types.
•Choose Edit | Traverse Ahead to the Next Station (or press [F7]).
Point
Type
Data
Northing
Easting
1
2000
2000
99
BS
1000
1000
2
SS
data
3
SS
data
4
SS
data
2
2100
1900
99
BS
1000
1000
In the example shown here, point 2 was recorded as a side shot along with points 3 and 4.
Then the traverse command was executed, adding the OP and BS records to the traverse.
Point 2 was recalled as the OP and point 99 was recalled as the backsight.
Without the Traverse command, point 2 would have to be shot after points 3 and 4 and its type changed to an Occupied/Foresight so that it could be occupied. Then a BS record would have to be added for point 99.