|
This topic discusses traversing with angles and distances using a total station, theodolite or compass and tape.
See Ground Traversing Learning Guide
Entering a Foresight
TPC defines a foresight as a point that is measured, then occupied before any other points are measured. A foresight record contains both the measured data used to compute a position for the foresight and the occupied point information like instrument height. Traverse PC uses the Occupied option from the Traverse View Type menu when designating either an occupied or foresight point type. See Entering a Foresight.
Reading the prompt line
The bottom line of the Traverse View always reminds you where you are. Notice that it displays BS= for the backsight, OP= for the occupied point and FS= for the foresight. See Reading the Prompt Line.
Combining Foresight Points and Occupied Points
To reduce the number of records required to traverse, TPC combines foresight data and occupied point data into one record type. Notice that when the point type is blank, the point is an occupied and/or foresight point. See Combining Foresight Points and Occupied Points.
Changing Backsights
Unless you specify a backsight point, TPC assumes that the previous occupied/foresight point is the backsight
Although this is probably the most common way to traverse, you can still specify a backsight other than the previous occupied point or foresight.
See Changing Backsights.
Using the Traverse Command
The Traverse command adds two points to the traverse - an Occupied/Foresight Point and Backsight Point. Once the points have been added, you can enter coordinates for the added points or recall existing points. The Traverse command saves your key strokes by adding the points and presetting their types. See Traverse Command.
Related Topics
Traverse View Entering Traverse Data Entering Point Labels and Descriptions Carrying Elevations in a Traverse Entering Side Shots Resection Using Data Sets Recomputing a Traverse Inserting Traverse Points Entering a Foresight Reading the Prompt Line Combining Foresight Points and Occupied Points Changing Backsights
Editions
Personal, Premium, Professional
|