TPC 2026
TPC 2026

 

 

Navigation: Traverses > Ground Traversing >

Combining Foresight Points and Occupied Points

 

 

 

 

To reduce the number of records required to traverse, TPC combines foresight data and occupied point data into one record type. Notice that when the point type is blank, the point is an occupied and/or foresight point. A typical traverse looks like:

Point

Type

Data

Northing

Easting

1

 

 

2000

2000

99

BS

 

1000

1000

2

 

data

2100

1900

3

 

data

2200

1920

4

 

data

2250

1970


This traverse starts at point 1 (the first occupied point) using point 99 as a backsight.

•A foresight is taken to point 2.

•Point 2 is then occupied.

•Next, a foresight is taken to point 3, using point 1 as the backsight. Unless otherwise specified, TPC uses the previous occupied point/foresight as the backsight.

•Point 3 is then occupied.

•Finally, a foresight is taken to point 4, using point 2 as the backsight.

Without combining foresight and occupied points, this same traverse would look like this:

Point

Type

Data

Northing

Easting

1

OP

 

2000

2000

99

BS

 

1000

1000

2

FS

data

2100

1900

2

OP

 

2100

1900

1

BS

 

2000

2000

3

FS

data

2200

1920

3

OP

 

2200

1920

2

BS

 

2100

1900

4

FS

data

2250

1970


Notice that without combining foresights and occupied points, you use three records to record what TPC records in a single foresight record.

For the times when you want to explicitly define the occupied point and backsight as shown here, TPC provides a traverse command. You’ll learn more about the traverse command later.


Related Topics

Traverse View
Entering Traverse Data
Ground Traversing

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.