TPC 2026
TPC 2026

 

 

Navigation: Drawings > Drawing in TPC - It's Not CAD > Drawing Traverses > Traverse Drawing Settings >

Advanced Traverse Drawing Settings dialog

 

 

 

 

This dialog gives you finer control over how the traverses and drawing interact.

Unique Settings

Each traverse has its own Traverse Drawing Settings that determine how the traverse is drawn.  Most of the time, this is the way you want it. But what if you want to draw a traverse with a solid line in one drawing and show it as an adjoining boundary with a dashed line in another drawing. In TPC, you would use Unique Traverse Drawing Settings for one of the drawings.

Control Points, Lot Labels, Sideshots - turn these options on to get the unique settings you want. Turn them off to return to the traverse drawing settings stored with the traverse.

Update Traverse

Choose this option to copy the unique settings (for this traverse in just this drawing) to the traverse itself. The traverse will now appear this way (with these settings) in any other drawing in which it does not already have unique traverse drawing settings.

This operation happens only for the Traverse Drawing Settings tabs that are included.  For example, if you have included just the Fill tab, only the Fill settings will be affected by this operation.

Update All Drawings

Make this traverse unique or not unique in all drawings in the survey. If you have created unique traverse drawing settings for a traverse then realized that you are probably going to want unique settings for traverse in every drawing, choose this option. You can now make changes to the traverse drawing settings of this traverse in any drawing without affecting the way it looks in the other drawings. That's because each drawing would have its own, unique settings for this traverse.

This operation happens only for the Traverse Drawing Settings tabs that are included.  For example, if you have included just the Fill tab, only the Fill settings will be affected by this operation.

Apply User Rotation to Point Labels / Lot Labels

Tag these to make these labels orient themselves with the current user rotation. Untag this to keep the label horizontal to the page (no user rotation applied)

Prioritize Control Points

By default, TPC says, "the first traverse to draw a point or a line determines how that point or line is drawn". The same is true for labels. TPC uses the traverse sequence in the Traverses Manager for the drawing to determine which traverse comes first.

When you prioritize control points, you are telling TPC to draw the symbols, point labels, line and line labels for this traverse regardless of the traverse sequence. So even if another traverse drew that object because it came first in the traverse sequence, this traverse if free to redraw that object because it has priority.

You can choose to individually prioritize Point Symbols, Point Labels, Lines and Line Labels.

 

Uses

These options improve workflows when drawing surveyed parcels with adjoiners.

In the example shown here, Lot 3 is the primary lot being surveyed, but Lot 2, an adjoiner, comes first in the traverse sequence. As a result, the line from 3 to 4 along with the symbols for points 3 and 4 are all drawn by Lot 2.

By prioritizing the control point Lines and Line Labels for Lot 3, Lot 3 is now allowed to draw the line and labels from 3 to 4 along with the symbols for points 3 and 4, making them consistent with all the other lines, line labels and symbols of Lot 3.

Prioritize Side Shots

By default, TPC allows symbols, point labels, lines and line labels that are created by side shots to be overwritten by another traverse that references the same survey points and lines as control points.  There are some variations of this in older versions of TPC where side shots control point symbols, even over control point settings. But as a rule, side shots are never allowed to overwrite objects created by another traverse's control point settings.

When you prioritize side shots, you are telling TPC to give the side shot objects drawn by this traverse the same priority as control points. As a result, another traverse is not allowed to overwrite the side shot drawing objects.

You can choose to individually prioritize Point Symbols, Point Labels, Lines and Line Labels.

Uses

These options can help you mix line and line label options within a traverse. To do this, you can insert side shots into the traverse where you want to include a particular label or line type. Then tell TPC to prioritize the Side Shot settings for that traverse. If another traverse in the drawing attempts to draw that same symbol, point label, line or line label, it will see that it has already been drawn and will skip over it.

Draw Backsights (using Control Point Settings)

Turn this option On to draw a line from all occupied points to the BS record following them.

TPC uses the control point settings to draw the backsight symbols, labels and lines.

This option is turned on automatically when you select the [x] Drawing Control Point Chain option available in some of the Import Settings dialogs.

Apply Traverse Direction Modifier

When you turn this option on, TPC applies the direction modifier for each traverse to any direction labels created for that traverse.

By default (when this option is turned off), direction labels are based soley on the inversed direction of the underlying survey coordinates.

Apply Traverse Distance Type

When you turn this option on, TPC uses the distance type of the traverse to label lines and areas.

By default (when this option is turned off), the Distance type specified in the Drawing Settings, Miscellaneous dialog determines the factor used to label all survey lines and compute all areas in the drawing. This option lets you override that setting for just this traverse.

You should not have to use this option routinely. It has the potential to mix different distance types in the same drawing - something we don't generally do.


Related Topics

Traverse Drawing Settings
Prioritizing Traverse Drawing Settings
 

 

 

 

Copyright © 2026 Traverse PC, Inc.