|
A traverse direction modifier is an angle you can direct Traverse PC to add or subtract from any direction it computes.
The Direction Modifier Equation
A simple way to understand what happens is to consider the following equation.
Computed direction (inversed from coordinates) + direction modifier = modified direction (displayed in drawing label, legal description, etc.)
Uses for Direction Modifiers
Direction modifiers are used primarily to reconcile differences in basis of bearing related to record data. You can rotate any traverse to get a better fit, but this changes the coordinates and therefore, the direction labels (azimuths or bearings) that TPC computes. However, you could then apply a direction modifier to those rotated azimuths or bearings so that they displayed their original, unrotated, values.
This is also useful for legal descriptions, where you want to write the description for a different basis of bearing than the one used to compute the traverse.
Example
Let's say you have a record data set A that uses due north (0°) as the basis of bearing and another set of record data B that uses a basis of bearing of 5° and you want to check their fit graphically.
•you would want to rotate set B to set A to compare them, but then the bearings of set B would be rotated
•if you then applied a direction modifier of data B to -5° to equate the two, the bearings of set B would display their original, unrotated, bearings
Specifying a Direction Modifier
You specify the direction modifier for a traverse in it's Direction Modifier dialog. This is a tab in the Traverse Properties dialog.
This dialog is very flexible, allowing you to enter the modifying angle directly, or computing it from existing survey data.

Editions
Personal, Premium, Professional
|