|
The Control Point Settings can be accessed through the Edit menu, the Control Point Settings button, or by right-clicking on the Drawing View drawing and selecting Control Points… on the pop-up menu.
Control Points = occupied points, foresights, PI’s, curves and spirals.
These settings are used when viewing, printing, or exporting the map.

Color
Tells the Drawing View what color to use for Control Points (Lines, Points, Symbols, Curve).
Lines
Choose the line type and line annotations for control points.
Font
Select the Font, character size and font style (Thin, Light, Normal, Medium, Bold, Heavy) you want to use for the line annotations (Distance, Direction, Grade) you select.
Line, None
Enter the line type (dashed, solid, etc.) and width you want to use for your Control Point lines. Select the None button to turn off lines.
Distance, Direction, Grade
Turn on [x] Distance, [x] Direction and [x] Grade to include them in the label based on the label format.
If the letter H (distance) is included in the label format, but you turn off [ ] Distance in this dialog, TPC will NOT include distance in the resulting labels.
If you turn on an option like [x] Distance, the appropriate format character, like H, must also be included in the label format. If the corresponding letter is not included in the label format, TPC will either add it to the label format automatically or prompt you to add it yourself.
Style
Choose a label style from Aligned, Stacked or Auto.
Format Label
Select this option to format the line label. You can specify the order in which to display the individual label options.
Leader & Gear Icon
Turns on Line Leader(s) for line annotations that don't fit on a line. The style (line type, arrow, size) of these leaders is controlled in the Drawing Settings dialog in the Miscellaneous tab.
You can manually turn leaders on and off for each label with the Leader On and Leader Off commands.
From the pull down list choose Single to put all items on a single line or Split to separate each item onto it's own line. This option only affects line labels that are drawn off to the side of the line because they don't fit on it.
Click the gear icon to open the Leader Feet settings for the traverse
Clear Background
Clear any pattern or bitmap fills to make the line labels easier to read.
Crows Feet & Gear Icon
Tag Crows Feet to turn on automatic crows feet for this traverse. Click the gear icon to open the Crows Feet settings
Reverse Direction
Reverse the direction labels.
By default, an azimuth or bearing label is generated based on the direction of the points in the traverse. However, you can reverse this direction by turning on this option.
You might use this when plotting accessories to a corner. The bearings would then be from the sideshot (accessory) to the corner.
Points
Choose how you want your Control Points displayed
Font
Select the Font, character size and font style (Thin, Light, Normal, Medium, Bold, Heavy) you want to use for the point labels. See Text Objects for more information on sizing text.
Point, Description, Z, Y/X, Station
Sets the point label options you want displayed on your map.
Point = Point Label Description = Point Description Z = Elevation Y/X = Northing and Easting Lat/Lon - Latitude and Longitude Station = Stations Attribute = Point Attribute
If the letter P (Point) is included in the label format, but you turn off [ ] Point in this dialog, TPC will NOT include the point label in the resulting labels.
If you turn on an option like [x] Point, the appropriate format character, like P, must also be included in the label format. If the corresponding letter is not included in the label format, TPC will either add it to the label format automatically or prompt you to add it yourself.
Format Label
Select this option to format the point label. You can specify the order in which to display the individual label options. You can also enter your own text like Station= or Elev=.
Starting with TPC Desktop 2017, you can also specify which quadrant you want the label to placed in relative to the survey point.
Interval
Choose an Interval if you don't want to label every point. Enter 2 to label every other point or 5 to label every fifth point, etc.
Angle
Choose the angle at which you want the label drawn (0=horizontal, 90=up, -90=down, etc.).
Draw Closing Point
By default, TPC tries to keep your drawing clean by not drawing or labeling the closing point of a closed loop traverse. If TPC did not do this, a closed loop traverse with a very small error of closure would end up with both the initial point and closing point drawing themselves over the top of each other.
There are times however, when the initial and closing points are not close together, that you may wish to draw the closing point. This option allows you to do so.
Leader
Turns on Line Leader(s) for point labels. Leaders will show up if you move the label away from it's default position next to the point.
You can manually turn leaders on and off for each label with the Leader On and Leader Off commands.
The style (line type, arrow, size) of these leaders is controlled in the Drawing Settings dialog in the Miscellaneous tab.
Symbols
Select the Point Symbol and size you want to use for Control Points.
None
Turn off the point symbol (no symbol will be drawn).
Browse
Select a symbol from the object library and add it to the symbol list. Once added, it can be used by any drawing in the survey.
Trim Symbols
With Trim Symbols turned on, the lines drawn between points will be trimmed to stop at the edge of the point symbols.
Angle
Rotates all control point symbols for the entire traverse.
Decimals
You can control the decimal settings for each traverse, just click the Decimals button. Sets the number of decimal places to use for Distance, Direction, Lat / Long, Stations, Percent, Elevations and coordinates.
Save / Recall Settings
Use these buttons to save and recall these settings. TPC opens the appropriate Settings List dialog where you select an existing saved setting or create a new one.
Saving and Recalling settings lets you standardize how you label plan and profile objects in your drawings. Create unique settings for clients that have specific requirements. Then, the next time you do work for that client, just recall their settings.
TPC provides a number of predefined settings for you. Feel free to use these as is or modify them to your liking.
OK
You will return to the Drawing View and your new settings will be in use when you click OK.
Cancel
Returns you to the Drawing View without applying any changes.
Related Topics
Drawing Control Points
Editions
Personal, Premium, Professional
|