TPC 2026
TPC 2026

 

 

Navigation: Drawings > Drawing Objects > Crows feet >

Crows feet dialog

 

 

 

 

This dialog lets you change the settings for crows feet in the drawing.

You can edit crows feet settings for both the drawing and individual traverses. This dialog is the same for both.

Line

Choose the line type and width to use for the crowsfeet.

Arrow

Select an arrow type and size. Note that the arrow point angle is controlled by the leader arrow point angle.

Shrink to fit

Crows feet have a segment near the end of the line being labeled that angles toward the end of that line. This can be a very short segment, depending on the label's offset distance from the line. So if you turn on arrows for your crows feet and tell TPC to draw them on the end of the crows foot away from the label, the arrow can be longer than this short segment.

Turn this option On to shrink the arrow length to fit totally within these short segments.  Default = Off.

Color

Select the color for the crowsfeet.

When selecting crows feet settings for a traverse, TPC includes the color ByTraverse. This setting tells the crows feet to use the same color the traverse uses. This is the default for traverse crows feet.

Point Symbol Gap

When a crows foot ends at a point symbol, these settings determine how close it gets.

Center - draw the crows foot all the way to the center of the symbol, the insert points. If the point has a point symbol, the crows foot like extends through the symbol to the center of the symbol.

Edge (default) - draw the crows foot up to the outside edge of the symbol. The crows foot line does not enter the symbol.

Gap - provides an additional gap from the center or edge.

Draw Crows Feet For

Choose the labels you want to draw crows feet for.

Distance - tangent, arc and spiral lengths.

Direction - tangent and long chord bearings.

Type

You can choose from two basic types for the segment of the crows foot closest to the end of the line. It can be curved or angled.

Curved

 A curved crows foot uses the segment lengths to determine the largest fillet radius that can be used depending on the Angle entered here and the label's distance from the line it labels.

As you move a label away from the line it labels, this radius gets larger.

Fillet

A fillet crows foot inserts the specified radius at the angle point nearest the ends of the line being labeled, creating a small fillet.

Angle

Specify the angle of the first segment from the line being labeled where 0° would be parallel to that ine and 90° would be perpendicular.

An angle of 30° (default) provides good separation from the line being labeled, but also allows for more than one crows foot in an interior angle, like an angle point in a property boundary.

Arrow Direction

If an arrow type is selected then you can choose which end of the crows foot you want to have the arrows displayed. Default is away from label.

Length of crows feet

No matter the type of crows foot chosen you can define the total length in inches the crows foot is drawn away from the ends of the line being labeled. Default = 0.3 in.

A length of 0.0 in draws the crows foot all the way to the label.

Full Length

Pressing this button resets the crows feet length to 0.0 in, which tells TPC to draw it all the way to the label.


Related Topics

Crows Feet
Drawing Settings vs. Traverse Drawing Settings

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.