TPC 2026
TPC 2026

 

 

Navigation: Drawings > Drawing in TPC - It's Not CAD > Drawing Traverses >

Drawing Side Shots

 

 

 

 

Side Shot Settings are part of the Traverse Drawing Settings TPC uses to draw a survey for you. 

Side Shot Settings draw all the side shots and offsets. Control points are drawn with the Control Point Settings.

 

Control point and side shot settings draw the lines for you (3:58) - In TPC, you don't draw lines like you do in CAD. TPC's lines are generated by the Traverse Drawing Settings.


Why Draw Side Shots?

You typically don't use Side Shot Settings in a final drawing nearly as much as you use Control Point Settings. This doesn't mean that side shots are not handy in a drawing. They can save you lots of drafting time when used properly for things like sewer laterals, overhead power lines and interior lot lines.


Changing Side Shot Settings From a Drawing

•Right click any object drawn by a traverse and choose Traverse Drawing Settings then left click the Side Shots tab.

•Choose the point symbol, line type and annotations you want. To turn off lines or point symbols, choose None from the pick list.

•Choose OK. TPC redraws the traverse with the new settings.

Changing Side Shot Settings From the Traverses Manager

•Right click the traverse you want to change and choose Traverse Drawing Settings then left click the Side Shots tab.

•Choose the point symbol, line type and annotations you want. To turn off lines or point symbols, choose None from the pick list.

•Choose OK. TPC redraws the traverse with the new settings.

Changing Side Shot Settings for Multiple Traverses in the Traverses Manager

You can select multiple traverses in the Traverses Manager then change the Traverse Drawing Settings for just one of the selected traverses and TPC will apply the settings to all of the selected traverses. This can include Side Shot Settings.


Related Topics

Drawing Traverses

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.