TPC 2026
TPC 2026

 

 

Navigation: Traverses > Traverse Properties >

Lot Setbacks tab

 

 

 

 

This dialog displays the lot setbacks for the survey (default setbacks) or a traverse.

Lot setbacks determine where TPC draws the setback lines for a traverse.

Survey vs Traverse

TPC stores setbacks with a survey and with each traverse in that survey. New traverses that you create in a survey, get their setbacks from the survey. You can then change them as needed for your individual traverses.

When editing the survey's setbacks, TPC displays a Reset to defaults button. This resets the survey's setbacks to TPC's defaults.

When editing a traverse's setbacks, TPC displays a Reset button. This resets the traverse's setbacks to the survey's setbacks.

LandXML

Setbacks are part of the LandXML schema, so TPC reads/writes them to LandXML files.

Front, Rear, Sides

Enter these values for your traverse. The defaults are Front=15.00, Rear=10.00 and Side=10.00.

Reset to defaults

Choose this button, when displaying the survey's setbacks, to reset them to TPC's defaults (Front=15.00, Rear=10.00 and Side=10.00).

Save Settings

Allows you to save the current setback settings with a name. Type in your desired name and click OK. You can recall these settings later

Recall Settings

Allows you to select from a list of saved settings. Once you've selected a named setting, click OK. The setback settings will now have the values from the saved setting.

Reset

Choose this button, when displaying a traverses setbacks, to reset them to the survey's defaults.

Summary

Sends the dialog information to the current Report View.


Related Topics

Traverse Properties
 

 

 

 

Copyright © 2026 Traverse PC, Inc.