TPC 2026
TPC 2026

 

 

Navigation: Traverses > Raw Data >

Displaying Raw Data

 

 

 

 

The Traverse View has two modes it can display data in: 1) Inverse Mode and 2) Raw Data Mode.


Inverse Mode

The default mode is Inverse Mode. This mode computes the inverses between coordinates, taking instrument and target heights into account and displays them in the appropriate columns. As you enter data, TPC stores the data, computes the point, then recomputes the inverses and displays them. If you adjust a traverse, the Traverse View displays the adjusted angles and distances.

You will use Inverse Mode most of the time.


Raw Data Mode

In raw data mode, the Traverse View displays only the data you have entered and only those columns which are included in the display sequence.

•For ground traverses, this can include angles, distances, heights, coordinates, latitude and longitude, etc.

•For GNSS traverses, this can include geodetic positions, ellipse heights, RMS and PDOP values, etc.

Any data that was not entered is left blank.  As a result, the Traverse View may contain many blank cells.

TPC displays the same raw data, regardless of whether or not the traverse has been adjusted.


Related Topics

Traverse View
Entering Traverse Data
Updating Raw Data
Recomputing a Traverse

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.