TPC 2026
TPC 2026

 

 

Navigation: Writing Legal Descriptions >

Legal Description Definitions

 

 

 

 

Legal descriptions employ special terms like radial, tangent, cusp, Point of Commencement vs Point of Beginning, etc.. The definitions of these terms are important in understand when and how certain phrases are used.

As a rule, TPC uses these terms as defined in Writing Legal Description - In Conjunction with Survey Boundary Control, Wattles, copyright 1979 by Wattles Publications.

This help topic will not define all legal description definitions. Our goal here is to help you identify what data goes into what phrases.

As you edit each phrase available in a TPC's legal description style, TPC lists the place holders available for that phrase. So a tangent phrase will not include place holders for curve data. But you still need to know some basic definitions.


Transitions From One Course to the Next

Many of these definitions define the geometry between one course and the next. This geometry determines which phrase TPC uses in the legal description.

In defining these, we will refer to the geometry from the first course to the second course.


Angular Tolerance

The angular tolerance determines how different two directions can be while still being considered equal (tangent or radial).

For example, for an out going direction N 90° E and a tolerance angle of 1'0", any direction from N 89°59'E to N 90°01' E would be considered tangent (tolerance angles are inclusive).

Each legal description style has it's own tangent tolerance angle that defines what is considered tangent.


Tangent vs Non-Tangent

Two courses are considered to be tangent if the starting direction of the second is equal to the end direction of the first, within some angular tolerance.

Example - any first course to non-tangent line: "Thence South 80°00’ East, a distance of 27.0 ft"

Example - arc to tangent line: "Thence North 89°54’ West tangent to said curve, a distance of 16.5 ft"


Radial

The radial refers to the radial direction to that point on a curve or spiral being equal to the direction of the adjacent course, within some angular tolerance.

Arcs have two radial bearings, one at the PC (Point of Curvature) and one at the PT (Point of Tangency). The PC radial direction is generally from the PC to the PR (Point of Radius), while the PT radial direction is generally from the PR to the PT.

Arc to Radial Line

This is the case where an arc is followed by a line which bears the same direction as the radial direction at the PT. The text "radial to said curve" can be added to indicate that the direction given for the line is a radial direction.

Example: "Thence North 00.02’ West radial to said curve, a distance of 10.0 ft"

Line to Radial Arc

This is the case where a line if followed by an arc that is oriented to the end of the line such that the direction at the end of the line is the the same as the radial line at the PC.

Example: " to the beginning of a curve radial to said line; Thence a distance of along the curve concave to the south, having a radius of 50 ft and a central angle of 20°30'10""


Reverse Curves

A reverse curve occurs when the radial direction to the PT of the first curve equals the radial direction of the PC of the second curve, within some angular tolerance. The direction of curve, clockwise or counter-clockwise, always changes at a point of reverse curvature.

Example: " to a point of reverse curvature; Thence easterly a distance of 20 ft along the arc of said curve concave to the..."


Compound Curves

A compound curve occurs when the radial direction to the PT of the first curve equals the radial direction of the PC of the second curve + 180°, within some angular tolerance. The direction of curve for both curves is the same.

Example: " to a point of compound curvature; Thence easterly a distance of 20 ft along the arc of said curve concave to the..."


Point of Cusp

A point of cusp occurs when the direction of the second course is more than 90° different from the direction of the first course. Some text will say when the second course goes back the way the first course came from.

We often associate cusps with the points of a crescent moon.

Example: " to a point of cusp on a curve concave to the west having a radius of 20 ft"


Large vs Small Curves and Spirals

TPC uses the words Large and Small in its phrases to indicate the raw data associated with the curvey. Curves defined and oriented by their long chords are refered to as Small. Curves defined and oriented by their radial bearings are referred to as Large.

Example of a Small Arc: " to the beginning of a curve concave to the west having a radius of 20 ft"

Example of a Large Arc: " to a point on a curve, from which the radius point bears N 30°40' E; Thence easterly along said curve"


Lines

Lines are straight lines, as opposed to curves and spirals, and are defined only be a direction and length.


Curve Directions

Curve directions are always northerly, northeasterly, easterly, etc. So as you travel along the curve, you are going some direction-erly.

However, curves are defined as being oriented concave north, northeast, east, etc.. This is always the direction from the center of the arc of the curve through the radius point of the curve.

Example: "Thence easterly a distance of 20 ft along the arc of said curve concave to the north"


Spiral Definitions

Beginning in TPC Desktop 2013, Release 1, spiral information is included in legal descriptions (in addition to the chord bearing and distance previously included).

TPC always references a spiral by its spiral type. In the examples above, TPC inserts "highway spiral" indicating that this is a "highway" definition spiral which uses arc length in its definition. Other spiral definitions, like "A.R.E.A. 10-Chord Spiral (Railroad)" are displayed when those spiral types are used.


Point of Commencement

The point of commencement is a point, other than the Point of Beginning, from which the legal description starts. The legal description includes calls from the Point of Commencement to the Point of Beginning, with each being clearly identified in the legal description.


Point of Beginning

The Point of Beginning is the point at which the legal description returns to for a closed parcel. It can be the first point in the legal description when a Point of Commencement is not required.


Related Topics

Legal Descriptions
Legal Description Phrases

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.