|
In TPC, line labels (tangents, curves and spirals) and point labels have their own label formats. You'll find these formats in their respective Label Format dialogs.
The concept behind label formats is that you can establish the exact label formats you want and TPC will then create the labels for you. Here are some examples of label formats.
But what if you want to include multiple formats in the same drawing. Lets say that you want to put measured values next to the lines and parallel to them, but you want to put record data farther from the line, with brackets around each value. You can do this with TPC, but you will need to learn how to mix label formats within a drawing.
Drawing Label Formats (Defaults)
A drawing has label formats it uses for any objects you draw manually (lines and arcs). These also act as the defaults for the traverses.
•From the Drawing View, choose Tools, Drawing Settings and choose the Object Labels tab.

•Choose Format Label in any of the Points, Lines or Arcs groups.
•Specify the formats you want for Aligned and Stacked along with the other format options.
You can now right click any line or arc you draw and choose Modify Object, Label. TPC will label the object using the appropriate label format.
Traverse Label Formats
Although traverse line, curve and spiral labels default to those used for the drawing, you can also tell each traverse to use it's own label formats.

•From the Drawing View, double click a survey object you want to change or right click it and choose Traverse Drawing Settings.
•In the Control Point and Side Shot tabs, choose Format Label from both the Lines and Points groups.
•In the Curves / Spirals tab, choose Format Label.
If you modify any of the label formats or options (like extra label offset, point label hold corner, etc) TPC will use those label formats for just that traverse. You can also make these format labels unique to just this traverse as it is displayed in just this drawing. TPC calls these Unique Traverse Settings.
When TPC labels a point or a line, it first looks to see if that traverse has it's own label formats. If it does, TPC uses those label formats for the label. If it doesn't, TPC uses the drawing's label formats. This hierarchy maximizes consistency in your drawing labels while still allowing you to modify their formats when you need to.
Resetting Traverse Label Formats
If you have modified the label formats for a traverse and you want to use the drawing's label formats instead, just access each Format Label buttons and turn on [X] Use Drawing Formats. Once TPC sees that the traverse's label formats exactly match those of the drawing, it will discard the traverse's label formats. From then on, until you modify the traverse label formats again, that traverse will use the label formats of the drawing (the defaults).
Remember that each drawing has it's own label formats. So once you reset a traverse's label formats to those of the drawing, that traverse gets it's label formats from the current drawing. Because of this, the line labels for that traverse can be formatted differently in different drawings.

Sharing Label Formats Between the Drawing and the Traverses
When you access the label formats from the Traverse Drawing Settings, you can copy the traverse's label formats to / from the drawing. Just use the Use Drawing Formats and Copy To Drawing Settings buttons.
So go ahead and experiment with a single traverse until the labels are just the way you want them. Then use the Copy To Drawing Settings and the drawing will use that label format.
Save & Recall Settings
When you choose the Save Settings and Recall Settings buttons in the Traverse Drawing Settings dialogs, you are saving and recalling the label formats you have specified for tangents, curves and spirals in the Traverse Drawing Settings List dialog.
So once you get traverse labels set up they way you like, save those settings and re-use them over and over. If you don't save them, you may end up re-formatting labels more than you should.
Best Practice
In practice, most TPC users rely on Saved and Recalled Traverse Drawing Settings to get just the format they want. You are free to share label formats with the drawing and to have the drawing get them from a drawing template, but again, in practice, you will probably just recall the settings you want for a traverse and go from there.
Related Topics
Label Command Labeling Traverse Lines Formatting Line Labels
Editions
Personal, Premium, Professional
|