TPC 2026
TPC 2026

 

 

Navigation: Drawings > Drawing Objects >

Offsets

 

 

 

 

You can create offsets of drawing objects by specifying and offset distance and the side of the original object to create the offset on.

Not all objects can be offset. A picture, for instance, does not allow offsets.

Layers and Other Properties

Offsets you create are inserted into the drawing on the same layer as the original and assumes all the properties of the original.

An offset is like a second copy of the object but is free to change as needed to meet the requirements of an offset. For example, a circle that is created as an offset will have a radius that is either larger (offset outside the original circle) or smaller (offset inside the original circle) than the original circle.


Offset Command

•Choose Draw | Offset.

The offset command prompts you for an offset distance then lets you apply it to as many objects as you choose. This command repeats automatically, allowing you to select additional objects to offset.


Object Offset Command

•Right click any object and choose Modify Objects | Offset from the context menu.

TPC will prompt you for the offset distance and the side to offset. see object Offset command.


Related Topics

Offsetting Drawing Objects
Object Offset Command

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.