In Traverse PC, you enter lots of data into traverses. That's how it gets it's name.
You can enter data manually, like you would for record data, or import data into a traverse from a data collector.
Importing GPS / GNSS Data
VIDEO
Import GNSS to Local Site (11:23) - Import GNSS positions and use Site Calibration to calibrate them to local site coordinates.
TPC Desktop can import your GPS or GNSS data directly into your survey regardless of its Coordinate Reference System (CRS).
• For a CRS like State Plane or UTM, the geodetic positions plot directly onto your CRS.
• For local site coordinates, like 5,000 / 5,000, TPC lets you calibrate the imported geodetic positions to your local site - neat!
Entering Record Data (10:47)
VIDEO
Lets take a deeper dive and look at entering record data into a traverse.
• Start a new traverse in the Traverse Manager
• Start with assumed coordinates because this is a Local Grid survey
• TPC Desktop draws the data as you enter it
• Learn how to enter bearings, using quadrants
• Enter a tangent curve - learn about CW vs CCW curve data
• Correct any mistakes you make
• Learn to use the COGO Horizontal Curve dialog when you need it
Entering Field Data (9:07)
VIDEO
Enter data from a total station to tie some building corners and run additional control - you can also import it from your data collector.
• Adding a traverse for the field data and format to show angles and distances
• Learn about the occupied point sequence - OP, BS, FS
• Instrument and target height
• Use F10 hot key for side shots
• Entering point descriptions
• TPC Desktop draws the shots in the drawing as you enter them in the Traverse View
Taping a House Foundation (7:28)
VIDEO
Learn how to enter data from taping around a house foundation.
• Adding a traverse for a foundation
• Add the field ties to the foundation traverse, establishing the position and orientation of the foundation
• Use labels like H102 to identify them as a house foundation shot
• Format the Traverse View for deflection angles (left / right)
• Use the Closure View to checking our taping numbers
• Labeling the foundation distances
Importing Total Station Data (10:21)
VIDEO
Importing data is a big topic at Traverse PC because we communicate with so many data formats. But we'll take a quick look here, at importing the field data you just entered in the previous tab.