TPC 2026
TPC 2026

 

 

Navigation: Surveys >

Working With Survey Data

 

 

 

 

Surveys have data for all the parts of a survey, like points, parcels, alignments, surfaces and drawings.

This topic describes this data in more detail.


Points

Points - points hold the coordinates in the survey and identify them by point label and description. In TPC, you manage points in the Points Manager.  TPC uses the term coordinate point, survey point or just point to refer to a location defined by a point label, northing, easting, elevation and description.


Traverses

Traverses - a traverse is any sequence of points that belongs together. Traverses are the absolute best way to organize your survey points. You can open a traverse in the Traverse View to edit it's data, the Closure View to check its closure or adjust its coordinates or the Vertical Curve View to refine its vertical alignment. You manage traverses in the Traverses Manager.

The term traverse refers to any series of points arranged in a logical order. Given this definition, a traverse might be the raw field data for a boundary traverse, a highway alignment, or a deed description.

You can create a traverse by entering field data, uploading data from a data collector, or recalling selected points from another traverse.


Record Data

Record Data describes existing features like lots, easements, boundaries and right-of-ways. You typically enter record data into a traverse that computes the points and draws the feature as you enter the data.


Field Data

Field Data is measured data like angles and distances or GP/GNSS data like latitude and longitude. You can also import this data from an electronic data collector and recreate the data as if you had entered it manually.


Alignments

Alignments are sequences of points that define a center line along with its horizontal and vertical alignments and any offset points.


Parcels

Lots or Parcels traverses are special traverses that close on themselves.  TPC calls these closed loop traverses, after the closure type. In this help topics, we'll refer to these as Lots. 


Lines

TPC manages survey lines internally as you develop your survey.  TPC only allows one line between any two survey points, bit that a tangent, curve or spiral.  You work with lines automatically when you recall any two survey points sequentially into a traverse.


Surfaces

Surfaces are created from points marked as Topo points. Once created, you can generate volumes, cut-fill reports, transects and slope analysis.

Surfaces - a survey can have any number of surfaces which you can tag to include in a drawing just like traverses. You manage surfaces in the Surface Manager.

An individual surface represents the elevations over part of a survey at a particular time.  So you can have preliminary surfaces, proposed surfaces, surfaces for each stage of a project and so on.


Drawings

Drawings are created by tagging traverses and surfaces. TPC then uses traverse drawing settings and surface settings to generate the drawing for you.

Drawings - a survey can have as many drawings as you need. Drawings include any tagged traverses and surfaces, smart drawing objects like legends and line tables plus anything you draw manually. You open existing drawing or create new ones in the Drawings Manager and work on the current drawing in the Drawing View.


Related Topics

Surveys

 

 

 

Copyright © 2026 Traverse PC, Inc.