|
TPC uses the terms Field Data or Raw Data to refer to measurements taken in the field, either manually or electronically with a data collector. These are typical angles and distances for conventional survey and latitude and longitude for GNSS.
The term Raw Data is often used because this data can be adjusted to reduce systematic and random errors.
Formatting the Traverse View
In TPC, you typically create a traverse to hold field data and format the Traverse View to match the data.
For conventional survey data, format the Traverse View to include field angle, zenith angle, slope distance, instrument and target heights. Now enter the data into the traverse or import data from a data collector.
For GNSS field data, format the view to display latitude and longitude and let TPC convert them to coordinates based on your Coordinate Reference System.
Formatting the Traverse Views allows you to enter any kind of data without codes (BR=bearing, HD=horizontal distance) like some surveying programs.

Using Quick View™ Technology
As you enter field data, TPC draws it for you in the Drawing View using our Quick View™ Technology. This is a great way to enter data and instantly see if you've made a blunder. Enter the data correctly and see if you covered the topo area properly or properly tied back into other control points.
Checking Closure
All control closes out on itself or another part of the survey. The Closure View is the place to check the closure of your survey control.
Related Topics
Drawings
Traverse View
Coordinate Reference System
Quick View™ Technology
Closure View
Closure
Editions
Premium, Professional
|