|
Point Description Rules
•Each point in the survey can have its own point description.
•These are the field notes you might otherwise enter on the right-hand side of your field book.
•TPC allows 255 characters (alpha or numeric) of field notes to be typed for each traverse point.
•Descriptions are saved with the coordinates of each point when you save a survey file.
Entering a Single Description
•Make sure the Description field is included in the display sequence. If not, choose View | Format View (or press [F9]), add the letter “D” to the Display Sequence and choose OK.
•Highlight the Description field.
•Type in the description and press [Enter].
Copying Point Descriptions to Appended Points
Often times when collecting data, you will pick up points in groups. You’ll pick up several top of curb shots before switching to a shot on a manhole. In these situations, it is nice to copy the description of the last traverse point to new traverse points as they are created. This reduces the amount of typing you have to do.
As TPC appends points to a traverse in the Traverse View, the description of the last traverse point is automatically copied to the appended point if Copy Descriptions is selected in the Traverse View Format.
If you don’t want the new point to have the copied description, just type over the old description with the new one.
Disabling Automatic Copy
To disable copying point descriptions in the Traverse View,
•Choose View | Format View
•Turn off [ ] Copy Descriptions
•Choose OK
|