TPC 2026
TPC 2026

 

 

Navigation: Survey Points > Survey Point Properties >

Survey Point Labels

 

 

 

 

Using Alpha / Numeric Point Labels

•Point labels can contain numbers and letters in any combination. In TPC, point numbers are just labels, so it doesn’t make any difference whether you use 120 or C1 for a point label.

•A point label can have up to 255 characters. Most of the dialog boxes display only six characters of a point label at a time, but you can scroll to the right to display longer point labels.

•Each point label in the survey must be unique. TPC identifies each point by its point label, so there can be only one point 200, and only one point 201, etc.

•TPC creates new unique point labels from existing point labels by adding a colon and a unique number to the new point. If TPC duplicates point A1 it tries to name it A1:1. If the survey already has a point labeled A1:1, TPC tries to name it A1:2, etc. In this way, the point label is unique, but you know that it is related in some way to point A1. You may edit any point label at any time.


Automatic Numbering

TPC automatically labels points that are added to the Traverse View by incrementing the point labels. Here are some examples:

•If you enter 1, the next points will be 2, 3, 4, etc.

•If you enter C1, the next points will be C2, C3, C4, etc.

•If you enter C1-R, the next points will be C2-R, C3-R, C4-R, etc.

•If you enter A, the next points will be A1, A2, A3, A4, etc.

Changing the Automatic Labeling Sequence

Enter the new label for the last point in the traverse. Any new points appended to the traverse will increment the new label.


Recalling an Existing Point

•Move to the Point column where you want to recall the point.

•Type the point label you want to recall and press [Enter].

•Choose [X] Recall the existing point and its coordinates.

•Choose OK.


Using Ranges of Point Numbers

You may want to use ranges of point numbers for different kinds of points. The most common system is to use point numbers below 100 for control points and point numbers above 100 for topo or side shots.

•To get the next available control point, type 1 and press [Enter] then choose [X] Use next available unused point number and choose OK. This will find the next available point number greater than 1.

•To get the next available side shot, type 101 and press [Enter] then choose [X] Use next available unused point number and choose OK to find the next available point number greater than 101.

 

 

 

 

Copyright © 2026 Traverse PC, Inc.