|
Once you have identified the grade breaks in the alignment and specified the curve lengths you want, you need to recompute the vertical alignment of the traverse.
Computing Vertical Curves
•Station the traverse so that you have points every 25, 50 or 100 units along the alignment. You can choose different intervals for horizontal tangents and curves/spirals.
•From the Vertical Curves Screen, choose Tools | Compute vertical Alignment.

•If you want to insert the BC and EC for each curve, turn on [X] Insert BC/EC. You will also need to specify a tolerance. If an existing traverse point is already within the tolerance you specify, the BC or EC will not be added. If the BC or EC is inserted, it can be identified by a “BC” or “EC” in the Type column.
•Edit the options you want and choose OK.
One of the important rules of computing vertical curves is that only existing traverse points are adjusted. If an existing point lies within a vertical curve, its elevation will be adjusted based on its location (stationing) in the curve. If the traverse does not have any points between the BC and EC, no points will be added.
Updating Tangents Between Vertical Curves
At times, you will want to update the tangent (constant grade) points, proportioning their elevations based on their distance from the previous EC and the next BC. In effect, this causes the entire vertical alignment of the traverse to be controlled by the VPIs in the Vertical Curve Screen.
•Choose Tools | Compute Vertical Alignment.
•Turn on [X] Update Tangents Between Curves.
•Choose OK.
Computing Selected Vertical Curves
You can update a single vertical curve or selected curves.
•In the Vertical Curve Screen, select the VPI(s) you want to compute.
•Choose Tools | Compute Vertical Alignment.
•Select the other options you want and choose OK.
If you use the Update Tangents options, the points on the tangents will be adjusted based on the vertical curve computations and grades.
Computing Unbalanced Vertical Curves
If you update VPIs manually based on the grade breaks in the current traverse, L1 and L2 are assumed to be equal. You can, however, enter different values for L1 and L2.
If the values for L1 and L2 are different, the high or low point of the curve is still computed at the VPI station, but the BC and EC are computed at their respective distances (stations) from the VPI.
Related Topics
Vertical Curves
|