|
You will need to tell TPC to draw the vertical curves you just computed.
•Close the Vertical Curve View and return to the Traverse View.

•Left-click the Drawing View to activate it. Make sure View | Profile Mode is checked.
•Right-click any traverse line in the drawing, choose Traverse Settings and match the settings shown here.
•Choose Tools | Drawing Settings. Make sure Draw Vertical Curves is checked and choose OK.
•Choose View | Zoom | Zoom Extents.

TPC labels the BC and EC stations because they are now traverse points. It also labels the PI of the vertical curve, even though it is not an existing traverse point.
The Drawing View also approximates the vertical curve with a series of short line segments that roughly match the parabolic shape of the vertical curve.
The profile settings include lots of options for labeling the stations, grades, grid and curves.
Note: You are working in a temporary drawing so you can see the profile view of this traverse. Most of the time you share the current drawing as you work with a traverse but this a good example of when a temporary drawing is useful. See Temporary Drawing.
Related Topics
Vertical Curves
|