TPC 2026
TPC 2026

 

 

Navigation: Calibrating Data > What is a Calibration? >

Calibration Results

 

 

 

 

A calibration is a set of parameters that can transform a coordinate from one coordinate system to another.


Horizontal Type

TPC supports the following Calibration types - scale only, translate only, scale and rotate, conformal, affine.  Other calibration types may be added in the future.


Vertical Type

The vertical type determines what TPC does with the elevations of the Uncalibrated points.

None

Elevations are not modified by the calibration.

Shift

TPC shifts all elevations by the average elevation shift computed for the calibration.

TPC adds up all the elevation differences of the point pairs used to compute the calibration and computes their average shift.

Shift + Include Plane

Selecting this option tells TPC to switch from a 2D solution to a 3D solution. The difference being that 2D solutions rotate only about the Z-axis, while 3D solutions rotate about the X-axis, Y-axis and Z-axis.

3D options include an elevation shift, but also create a 3D plane from the rotation about the three axes.


Parameters

Calibrations are coordinate transformations.

The parameters vary based on the type. For a 2D Conformal calibration, the parameters are "a,b,c,d,horizontal scale,rotation (ccw radians),reference variance"

TPC uses these parameters to perform the actual calibrations, both forward and reverse.

These parameters are stored with the survey's TRV file for every calibration that is used in the survey. Storing these parameters independently of their .cal files allows TPC to undo a calibration at any time, even if the corresponding .cal file is no longer available.


Related Topics

Calibrating Data

Editions

Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.