|
This dialogs presents the computation results for this calibration.

What is Reported
Type
The type of calibration being used. For example, 2D Conformal, 2D Translate Only, etc.
You will also see a concise definition of the selected type.
[Type ] Parameters
These are the parameters produced by the calibration computations and used to calibrate points, including Rotation, Scale and Reference Variance.
As a rule, TPC displays all the parameters with (no translation), (no scale) or (no rotation) after their corresponding values if that value is not used for that calibration type. So a 2D Translate Only, would include (no scale) and (no rotation) after their corresponding parameter values.
[Results]
TPC lists the Uncalibrated position, the calibrated position, the standard deviation of the calibrated position and the coordinate difference and inversed distance and azimuth between them.
All of the original, Uncalibrated points are included, even if they do not have a corresponding control point.
Include Distance and Direction above is checked
Distance and direction errors are included only if [x] Include Distance and Direction above is checked.
Horizontal
Select the calibration type to re-apply to the data in the Points tab. When you select a new type, TPC automatically recomputes the calibration with that new type.
The type you select here will be either 2D (default) or 3D if you select Shift + Plane from the Vertical pulldown.
Scale Factor = 1.0 (No Scaling)
Turn this option on to leave the scale at 1.0 after the calibration is computed.
This can be a handy feature as you create calibrations that may be applied to both grid and ground coordinates where everything is the same except for the grid<=>ground scaling.
Vertical
Choose whether or not you want to calibrate the vertical positions and how.
None
Elevations will not be calibrated.
Shift Only
TPC will compute the average change in elevation and apply it to each calibrated point.
Shift + Plane
TPC will switch from a 2D calibration of the type you selected to a 3D calibration of that same type.
3D calibrations rotate about all three axes (X, Y and Z), creating a 3D plane to which elevations are calibrated.
Recompute
Press this button to recompute this calibration using the currently selected dialog options.
Related Topics
Calibrating Data
Editions
Premium, Professional
|