Navigation: Calibrating Data > Creating Calibrations > Select point pairs manually from drawing From the Create Calibration dialog, choose Select point pairs manually from the current drawing (Uncalibrated first) TPC will activate the Drawing View, if it is open, and prompt you to do the following •select an Uncalibrated point (left click or use the snap commands) •select the corresponding calibrated point (left click or use the snap commands) Repeat these steps for as many point pairs as you want to include in the calibration, then right click or press the Enter key. If the Drawing View is not open, the command can not execute. Calibrating an XRef (4:48) - Calibrate an XRef from a DWG file to the survey's Coordinate Reference System Related Topics Calibrating DataCreating Calibrations Editions Premium, Professional Copyright © 2026 Traverse PC, Inc.