|
The DDM lists all the blocks currently used in the drawing.
Block Information
/ddm-block-expanded.png)
For each block, TPC lists information about the block
•Name - stored in the dxf file
•ID - the ID blockreferences store for this block
•File & Folder
•Extents - based on the units that define the block
•Origin - the snap point of the block
•Objects: # - expand this to see the objects in this block
Fixing Bad Block References
As a rule, TPC stores the relative path to the blocks it uses in a drawing. When the drawing is opened, it tries to resolve those references and load the block.
If you have moved the blocks or the survey file such that TPC can not resolve a block reference, TPC can display the block reference in brackets within the drawing as {path and filename for the block} but even this reference may be hard to find in the drawing. In these cases, the DDM is best place to find and fix them.
Expand any block and TPC will display it's block reference. You can often easily identify the block path issue just by looking at the reference.
To edit the block path reference, just double click the block. TPC opens the Block Reference Properties dialog where you can browse for the block. Once you have fixed the block path reference, TPC can display the block in the drawing.
Missing Block Files
If you opened a Shared Survey File for which you do not have the block files available locally, TPC will display the warning ! Missing File. These blocks may still have all their objects, allowing you to ignore this message.
If you open a survey that was not shared and a block file is missing, that block won't have any objects defined and will not draw in the drawing.
See Sharing Surveys.
Deleting Unused Blocks
Once you have used a block in a drawing, TPC adds it to that drawing's block list. That way the block is available to be reused as many times in the drawing as needed.
However, if you are no longer using a block because you have deleted it, you may also want to remove it from the drawing. Just select it here in the DDM and delete it.
XReference Blocks
Blocks managed by XRefs are not listed in the DDM. They can be found by expanding the XReferences themselves.
Related Topics
Drawing Data Manager Sharing Surveys
Editions
Personal, Premium, Professional
|