TPC 2026
TPC 2026

 

 

Navigation: Using CAD > Using DWG Files >

Exporting DWG Files

 

 

 

 

TPC writes DWG files from the Export dialog box. You can use all of the graphics options to draw your survey, then write a copy of it to a DXF or DWG file.

 

Export a Drawing to a DWG File (1:52) - See how to create a DWG file from your drawing and open it in a CAD program


To Export a Drawing to CAD

•From the Drawing View, choose Tools | Export Drawing as. You will see the Export dialog.

•Select AutoCAD DWG from the Type list.

•Enter a file name for the export file or choose Browse.

•Choose Settings, select the Export options you want and choose OK.

•From the Export dialog, choose Export.

•Select an AutoCAD version from the pop-up dialog.

Congratulations! You just wrote a DWG file.


Exporting Surfaces to CAD

TPC exports surfaces to CAD as polyfacemesh entities.

 

Export Surface To CAD (2:32) - We've made two changes to surfaces that are exported to CAD. 1) The polyfacemesh layer is turned off by default, but you can turn it back on. 2) TPC now writes contours as polylines even when contour labels are turned on.

 

Export Surface to CAD (2:39) - We've made two changes to surfaces that are exported to CAD. 1) The polyfacemesh layer is turned off by default, but you can turn it back on. 2) TPC now writes contours as polylines even when contour labels are turned on.


DWG Versions

TPC can write Release 11 to 2007 files. You will need to specify the release to write in the Export Settings dialog.


Scaling the DWG File

In other CAD programs, text size is a factor of the drawing height. This means that as you scale the drawing, the text size changes. Often times, you then have to rescale individual text because it got too big or too small.

TPC eliminates this problem by factoring the text size for you when it writes the file. The file will be written so that when plotted in CAD at the same scale selected in Drawing View, the text size will be the same as it was in Drawing View.


Scaling Line Types

CAD programs use a 'Line Type Scale' variable to determine how often a line patter repeats. By default, TPC sets the Line Type Scale to a forth of the drawing scale. If your drawing scale is 100, the Line Type Scale will be set to 25. Use the 'LTSCALE' command in your CAD program to change this value.

In some versions of AutoCAD, you may need to active the Display lineweight option. Choose Format, Lineweight... to display the Lineweight Settings dialog. Then turn on the Display lineweight toggle.


Omit Line Scale

In a CAD export dialog, you will see the [ ] Omit Line Scale option.

•When this option is on, TPC sets the LTScale to 1.0 for the exported drawing.

•When this option is turned off, TPC sets the LTScale to the drawing scale.

•Prior to 2004, TPC used drawing scale / 4.0 to get proper spacing on dashed lines.  That reduction has not been used since 2004.


Export Layer Options

Along with the automatic scaling of text size, you need the flexibility to establish layers as efficiently as possible. TPC allows you to name your layers by traverses or entity type or a combination of both. Let’s take a look at the options, and then talk about how they can simplify your CAD work.

TPC allows layer names up to 32 characters long. You can use any combination of numbers, letters, dash or underscore. Some CAD programs allow only layer numbers. If so, just enter numbers for the layer names.

See Export Layer Options.


Color Options

You can force the color of all objects written to be BYLAYER. If you think that you will be modifying colors to better view all of the utility points or center lines, etc, turn on the [X] Color by Layer option in the Settings dialog.


Line Type Options

Entity line types work much like entity colors. To force the line types of all lines to be set to BYLAYER, turn on the [X] Linetype by Layer option in the Settings dialog.


True Type Fonts

In V4.02 and above, TPC writes the True Type fonts used in the drawing to a font table. TPC replaces the spaces in the font name with underscores "_" to create the font name written to the DWG file. For example, Times New Roman becomes Times_New_Roman. TPC also includes the pathname of the true type font file in the font table. If a font used in the drawing is not available on the computer writing the DXF file, TPC writes the font name (i.e. Times_New_Roman) instead of the pathname. When the DXF file is read, the user is prompted to select a font file for the font name.

AutoCAD R13 does not support True Type fonts properly. When writing a DWG file in this format, you can choose to omit the text styles in the export settings dialog. This forces AutoCAD to use the STANDARD font for all text entities when it opens the DWG file.


Survey Units

In the export settings dialog, you can turn on an option to include the survey's units (meters or feet) in the exported CAD file.  Currently works only for DWG export.

If turned on, TPC checks to see if the survey has a Coordinate Reference System (CRS), and if the CRS exists and the survey's units are Feet, TPC uses the US Survey vs International foot settings of the CRS for the exported drawing units.

If turned off, TPC exports the drawing's units as undefined.  As such, if this drawing is appending to an existing CAD drawing, it assumes the units of that existing CAD drawing.


Related Topics

Using DWG Files

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.