|
TPC writes DXF files from the Export dialog box. You can use all of the graphics options to draw your survey and then write a copy of it to a DXF file.

•From the Drawing View, choose Tools | Export Drawing as. You will see the Export dialog box.
•Select AutoCAD DXF or Generic DXF from the Type list.
•Enter a file name for the export file or choose Browse.
•Choose Settings, select the Export options you want and choose OK.
•From the Export dialog, choose Export.
Congratulations! You just wrote a DXF file.
Scaling the DXF File
In other CAD programs, text size is a factor of the drawing height. This means that as you scale the drawing, the text size changes. Often times, you then have to rescale individual text because it got too big or too small.
TPC eliminates this problem by factoring the text size for you when it writes the file. The file will be written so that when plotted in CAD at the same scale selected in Drawing View, the text size will be the same as it was in Drawing View.
Scaling Line Types
CAD programs use a 'Line Type Scale' variable to determine how often a line patter repeats. By default, TPC sets the Line Type Scale to a fourth of the drawing scale. If your drawing scale is 100, the Line Type Scale will be set to 25. Use the 'LTSCALE' command in your CAD program to change this value.
In some versions of AutoCAD, you may need to active the Display lineweight option. Choose Format, Lineweight... to display the Lineweight Settings dialog. Then turn on the Display lineweight toggle.
Omit Line Scale
In a CAD export dialog, you will see the [ ] Omit Line Scale option.
•When this option is on, TPC sets the LTScale to 1.0 for the exported drawing.
•When this option is turned off, TPC sets the LTScale to the drawing scale.
•Prior to 2004, TPC used drawing scale / 4.0 to get proper spacing on dashed lines. That reduction has not been used since 2004.
Layer Options
Along with the automatic scaling of text size, you need the flexibility to establish layers as efficiently as possible. TPC allows you to name your layers by traverses or entity type or a combination of both. Let’s take a look at the options, and then talk about how they can simplify your CAD work.
TPC allows layer names up to 32 characters long. You can use any combination of numbers, letters, dash or underscore. Some CAD programs allow only layer numbers. If so, just enter numbers for the layer names.
See Export Layer Options.
Point Symbol Options
TPC can insert blocks for each of the point symbols or actually draw the symbol in the DXF file. The default is to insert the point block.
Inserting blocks is the preferred method for the following reasons:
It produces smaller DXF files.
It allows you to select the point symbol in CAD by picking any part of the symbol.
You can also move, rotate and scale the symbol as one entity.
The insert point of the symbol is the survey point itself.
To insert point blocks
•In the DXF Settings dialog, turn on [X] Write symbol blocks in the Export box.
Some programs, like Microsoft Word 6.0 do not look for blocks in DXF files. If you insert blocks and read the DXF file into a program like this, you will not get any point symbols. In these situations, you must turn off the [ ] Write symbol blocks options and let TPC draw each symbol with the individual line, circle and arc entities that make up the block.
Color Options
TPC can write colors by layer or by entity. The default is by entity.
If you think that you will be modifying colors to better view all of the utility points or center lines, etc, turn on the [X] Color by Layer option in the DXF Settings dialog.
If you would like to set the color for each entity individually, turn this option off.
Line Type Options
Entity line types work much like entity colors. TPC can write the line type for each line or allow line type to be controlled by the layer settings. The default is by entity.
To write line types by layer, turn on the [X] Linetype by Layer option in the DXF Settings dialog.
TPC does not store line types by layer (it stores them by drawing, traverse or entity). As a result, if you turn on the 'Linetype by Layer' option, you will need to edit the layer linetypes after you import the DXF file into your CAD program.
Modifying the DXF Data
TPC stores much of its DXF header information in the DXF subdirectory. You can edit these files to change the type of DXF file TPC writes.
Note: You should modify these DXF files only if you are experienced with the DXF file format.
Several files are used to write the DXF header file information. These files are:
HEADER.DXF - contains drawing setup information
LTYPE.DXF - contains line type table
TABLES.DXF - contains other tables including fonts (fonts are not included in V4.02 and above).
The symbols that are inserted into the drawing are also stored here. Files with the DXF extension are block definitions that get inserted into the DXF header section.
True Type Fonts
TPC writes the True Type fonts used in the drawing to a font table. TPC replaces the spaces in the font name with "_" to create the font name written to the DXF file. For example, Times New Roman becomes Times_New_Roman. TPC also includes the pathname of the true type font file in the font table. If a font used in the drawing is not available on the computer writing the DXF file, TPC writes the font name (i.e. Times_New_Roman) instead of the pathname. When the DXF file is read, the user is prompted to select a font file for the font name.
AutoCAD R12 and R13 do not support True Type fonts properly. When writing a DXF file in these formats, you can choose to omit the text styles in the export settings dialog. This forces AutoCAD to use the STANDARD font for all text entities when it opens the DWG file.
Related Topics
Using DXF Using DWG Layers Working with Drawing Objects Converting Drawing Objects to Survey Points
Editions
Personal, Premium, Professional
|