|
If you don't have cell coverage on site or can't create a hot spot, you can still share data between your emlid devices and TPC.
Emlid Flow
Emlid flow, running on your Android or iOS device can also import and export points. As a result, you can share data with TPC in the field, via emlid CSV import and export.
Collecting Data
When collecting data with emlid Flow, you can just wait until you have WiFi again, then open a project. It will sync all data to your emlid account making it available account wide.
If you need access to that data in the field, you can also export an emlid CSV file directly from emlid Flow. This places that file on that device, where it can be transferred to a laptop or tablet running TPC via bluetooth or a data cable.
Stakeout
With an emlid base and rover, you can still use RTK for stakeout, as long as the base can be set up over a known point and the rover and base can share RTK corrections via their LaRo radios.
Open the project in emlid Flow on your device, while you have WiFi and before you go into the field. Those points will now be on the device and can be used for stakeout in the field, without WiFi.
You can also import any stakeout points into an emlid Flow project.
•export an emlid CSV file of the points from TPC
•use bluetooth or data data cable to transfer that file to your emlid Flow device
•mport that file into the emlid Flow project
Calibration
If your existing survey is not on the same Coordinate Reference System (CRS) your emlid Receivers will be using, you will need to calibrate the two. See Calibrating GPS/GNSS Data.
In the process of calibrating, you will need to
•measure at least two of your existing survey's control points
•export those measured points to TPC via an emlid CSV file
•do the calibration in TPC
•export calibrated points back to the emlid Flow device
•import those points into the project via emlid Flow
Importing emlid CSV Data
When you import emlid CSV data, TPC creates a survey point for each imported point and assigns the GNSS data to it. TPC then computes the associated coordinate for that point. See Importing GNSS CSV.
Exporting emlid CSV Data
When you export survey points as emlid CSV data, TPC exports the geodetic position along with the coordinates if you choose. The format of the CSV match the format used by your emlid GNSS equipment. See Exporting GNSS CSV.
Point Codes
Emlid data can use point codes the same way TPC does. Point codes simplify data collection in the field and can be used to help turn your data into a drawing. See Emlid Point Codes.
Related Topics
Using GPS/GNSS Calibrating GPS/GNSS Data Emlid Point Codes
Editions
Premium, Professional
|