|
Use this dialog to manage the calibrations used by this survey. As a rule, you will use this dialog only to clean up calibrations that a survey is no longer using or that were used by accident and later replace with the a different calibration.
This dialog is accessed via the Manage Survey Calibrations command.
Calibrations used by this survey
Lists the calibrations currently used by this survey, along with the number of objects currently calibrated by it.
Calibration Information
Displays information about the selected calibration.
Preview
View the .cal file for the selected calibration.
Browse
Add an existing calibration to the survey by opening it's .cal file.
Create
Create a new calibration via the Create Calibration dialog.
Protect Points
Protect all the survey points that were calibrated with the selected calibration.
Unprotect Points
Unprotect any calibrated survey points (for the selected calibration) that are protected.
Report
Displays basic information about this calibration in the Report View.
Uncalibrate
Undo the selected calibration.
TPC identifies all the objects in the survey and drawings that have been calibrated with this calibration and Uncalibrates them.
Remove
Select a calibration in the list, then choose Remove. TPC removes the selected calibration from the survey.
Only calibrations with a zero calibration count can be removed. If the survey contains any data or drawing objects that have been calibrated by the selected calibration, TPC will not remove it.
Removing a calibration in this dialog does not delete the associated calibration file (.cal). It only removes the stored calibration information from the survey.
Close
Closes this dialog.
Related Topics
Calibrating Data
Editions
Premium, Professional
|
