TPC 2026
TPC 2026

 

 

Navigation: Alignments > Stations and Offsets > Station Offsets >

Station Offset dialog

 

 

 

 

Inserts two points into the current traverse at the requested station. One is the station point along the alignment. The other is the offset point from that station.

After the points are inserted into the traverse, you can edit the offset information like you would any other side shot.

Station

Enter the desired station. Stations are entered like 34+50.00.

Offset

Enter the offset distance from the station points. Negative is left, positive is right.

Elevation

If you know the elevation you want for the offset point, enter it here.

Options

Use these options to determine how the offset point is computed.

Copy Centerline Elevation a Station to Offset

Use this option to transfer the station elevation to the computed offset point.  If this option is turned on, the elevation you entered above will be ignored.

Tolerance

The offset tolerance determines how close any two points being offset need to be in order to be treated as one point. If they do not reference the same survey point but are within the specified tolerance of each other, they will be considered the same point and you will get a single offset instead of two.

Computed Offset

This is the point computed for the information you entered.

Point

Enter the point label of the offset point that will be created. The station point uses the station as its point label. Use the [>] pick button to select the point from the current drawing.

Edit

Edit the point label, description, symbol, symbol size and rotation, protect the computed coordinates, etc.

Distance

Enter the horizontal distance to the offset point. Enter a negative distance for a left offset and a positive distance for a right offset.

If you have information other than horizontal distance (i.e., slope distance and percent slope), you can enter the appropriate data in the Traverse View.

Too add just a station point without an offset, set the Offset to 0.0.  See Adding Single Stations.

Z

If you know the elevation of the offset point, enter it here. You can modify it later from either the Traverse View or the Points Manager. This option is not available if you choose Use Center Line Elevation.

Use Center Line Elevation

Uses the elevation of the center line station for the elevation of the offset point.

Insert

Inserts the Station Offsets into the traverse and includes it in the current drawing.

Close

Closes the Station Offset dialog and returns you to the Traverse View.


Related Topics

Creating Station Offsets
Adding Single Stations
Creating Stations at Intervals
Entering Stations and Equations
Entering Equations
Setting the Default Direction

 

 

 

Copyright © 2026 Traverse PC, Inc.