This adjustment multiplies the horizontal distance of each course in the traverse by a factor, recomputing coordinates from the Initial point. To double the length of each course, enter a factor of 2.0000.
When TPC applies this adjustment, it inverses between the traverse points to get the azimuth while applying the scale factor to the raw distances. This feature allows you to balance angles before applying the scale factor without losing the angular adjustments. In fact, if you will be balancing angles and applying a distance factor, you need to balance the angles first, then apply the distance factor.
Beginning with TPC Desktop 2014, TPC applies the scale factor to the inversed horizontal distance if raw distance data is not available. To undo the scale factor in this situation, you would need to first apply the inverse of the original factor (1 / original factor) to restore the inversed points then re-compute the traverse to restore any traverse points computed from raw horizontal data. TPC still warns you if it sees that one or more factored points do not have raw data.
You can enter an equation in this field to compute the factor you want. For example, entering the equation 1/2 would produce the factor 0.5.
Scale Factor (1:39) - Apply a scale factor adjustment to a traverse
Sticky Adjustment
TPC refers to Precision, Curvature & Refraction and Scale Factor as 'sticky' adjustments. You can apply sticky adjustments before balancing angles and coordinates. Sticky adjustments also remain in effect when you choose Tools | Recompute from the Traverse View.
Note: The Scale Factor is not the same as the Distance Factor specified in the Traverse View Format menu and does not modify the Distance Factor in any way.