TPC 2026
TPC 2026

 

 

Navigation: Sharing Data (Importing / Exporting) > Importing Survey Data >

Converting Coordinates on Import

 

 

 

 

Use this option to convert imported coordinates (y,x,z) from one type to another. This can be metric to imperial, imperial to metric, grid to ground, ground to grid, etc..

TPC imports the coordinates from the file, converts them based on the conversion type selected, then compares them with existing survey points when determining if a matching survey point already exists. If the imported coordinates end up creating a new survey point, that new point will have those coordinates.


Matching your survey's coordinates

You generally want the imported points to end up with the same coordinate type as the survey. For example, if you are using a state plane projection, like NAD83, your survey coordinates are on that state plane grid. As a rule, you want any imported coordinates to be state plane grid coordinates. If they are not, you will want to convert them to state plane coordinates on import.

Geodetic survey

If your survey has a CRS, you generally want the imported points to end up with the same coordinate type as the survey. So you will need to determine if the coordinates being imported are ground our grid (TPC's CRS grid) and convert them accordingly.

Local survey

If your survey does not have a CRS, you are working in a local grid for that site. These local grids often use starting coordinates of 10000, 10000 or 0,0. In this case, you do not want to convert imported coordinates. Instead, you are making the assumption that the coordinates being imported are local or ground coordinates.

Surveys that use both local and geodetic

We used the word generally above, because you can have a survey in TPC that uses a CRS to relate a few GNSS control points to your ground survey, but otherwise uses ground coordinates for all the points. This is typical of boundary surveys or small subdivisions that do not cover a lot of area and have few geodetic constraints.


Showing the Conversion in the Details Report

If you turn on [X] Details before you import, TPC will include both the original (imported) coordinates and the converted coordinates for each point in the report.


Related Topics

Importing Survey Data
Exporting Data
 

 

 

 

Copyright © 2026 Traverse PC, Inc.