TPC 2026
TPC 2026

 

 

Navigation: Writing Legal Descriptions >

Legal Description Spiral Phrases

 

 

 

 

Spiral phrases describe the next course in the legal description, as it relates to the previous course, if one or both of the courses is a spiral.

For example, when a legal description documents the transition from a spiral to a line that is tangent to the spiral at it's ST (Spiral to Tangent point), TPC uses the <SPIRAL TO TANGENT LINE> phrase because it matches the geometry of that particular transition.

Available Place Holders

In the phrase descriptions below, we list the available place holders. For more information about these, wee Legal Description Place Holders.

Typical Phrases

With each phrase below, we include a typical phrase to give you an idea how the phrase is structured. You are free to edit phrases to your liking in each legal description style you create.

Non-Spiral Geometry

Geometric transitions that do not involve a spiral are available in the Geometric Phrases.

Thence and Then

The words Thence and Then, when used to begin a geometric phrase, also trigger a new course in the legal description.

TPC inserts a semi-colon (;) to designate the end of the current course. If you place each course on its own line, this will trigger a new line.


<LINE TO TANGENT SPIRAL >

This phrase describes the transition from a line to a tangent spiral, regardless of the general direction of the spiral.

Available Place Holders

<SPIRAL DEFINITION>, <SPIRAL COMBINED DIRECTION>, <SPIRAL LENGTH>, <SPIRAL CONCAVE DIRECTION>, <SPIRAL RADIUS BEGIN>, <SPIRAL RADIUS END>, <SPIRAL K>, <SPIRAL CENTRAL ANGLE>, <SPIRAL LEFT RIGHT>, <SPIRAL CW CCW>, <SPIRAL LONG CHORD DIRECTION>, <SPIRAL LONG CHORD LENGTH>.

Available Nested Phrases

<BEGINNING OF SAID SPIRAL BEING>, <HAVING COORDINATES>, <HAVING GEODETIC POSITION> and <TO A POINT BEING>.

Typical Phrase

" to the beginning of a spiral tangent to said line<BEGINNING OF SAID SPIRAL BEING>; Thence <SPIRAL COMBINED DIRECTION> a distance of <SPIRAL LENGTH> along the spiral concave to the <SPIRAL CONCAVE DIRECTION>, having a beginning radius of <SPIRAL RADIUS BEGIN> and ending radius of <SPIRAL RADIUS END> constant of proportionality of <SPIRAL K> and a central angle of <SPIRAL CENTRAL ANGLE><TO A POINT BEING>"


<SPIRAL TO TANGENT ARC>

This phrase describes the transition from a spiral to a tangent curve, regardless of the general direction of the curve.

Available Place Holders

<ARC COMBINED DIRECTION>, <ARC LENGTH>, <ARC CONCAVE DIRECTION>, <ARC RADIUS>, <ARC CENTRAL ANGLE>, <ARC LEFT RIGHT>, <ARC CW CCW>, <ARC LONG CHORD DIRECTION>, <ARC LONG CHORD LENGTH>.

Available Nested Phrases

<BEGINNING OF SAID SPIRAL BEING>, <HAVING COORDINATES>, <HAVING GEODETIC POSITION> and <TO A POINT BEING>.

Typical Phrase

" to the beginning of a curve tangent to said spiral<BEGINNING OF SAID CURVE BEING>; Thence <ARC COMBINED DIRECTION> a distance of <ARC LENGTH> along the curve concave to the <ARC CONCAVE DIRECTION>, having a radius of <ARC RADIUS> and a central angle of <ARC CENTRAL ANGLE><TO A POINT BEING>"


<ARC TO TANGENT SPIRAL >

This phrase describes the transition from a curve to a tangent spiral, regardless of the general direction of the spiral.

Available Place Holders

<SPIRAL DEFINITION>, <SPIRAL COMBINED DIRECTION>, <SPIRAL LENGTH>, <SPIRAL CONCAVE DIRECTION>, <SPIRAL RADIUS BEGIN>, <SPIRAL RADIUS END>, <SPIRAL K>, <SPIRAL CENTRAL ANGLE>, <SPIRAL LEFT RIGHT>, <SPIRAL CW CCW>, <SPIRAL LONG CHORD DIRECTION>, <SPIRAL LONG CHORD LENGTH> .

Available Nested Phrases

<BEGINNING OF SAID SPIRAL BEING>, <TO A POINT BEING>, <HAVING COORDINATES>, <HAVING GEODETIC POSITION>.

Typical Phrase

" to the beginning of a spiral tangent to said curve<BEGINNING OF SAID SPIRAL BEING>; Thence <SPIRAL COMBINED DIRECTION> a distance of <SPIRAL LENGTH> along the spiral concave to the <SPIRAL CONCAVE DIRECTION>, having a beginning radius of <SPIRAL RADIUS BEGIN> and ending radius of <SPIRAL RADIUS END> constant of proportionality of <SPIRAL K> and a central angle of <SPIRAL CENTRAL ANGLE><TO A POINT BEING>"


<SPIRAL TO TANGENT LINE>

This phrase describes the transition from a spiral to a line tangent to that spiral.

Available Place Holders

<LINE DIRECTION>, <LINE LENGTH>.

Available Nested Phrases

<TO A POINT BEING> and <REFERENCE DIRECTION>.

Typical Phrase

"Thence <LINE DIRECTION> tangent to said spiral, a distance of <LINE LENGTH><TO A POINT BEING>"


<NEW SPIRAL DIRECTION SMALL>

The phrase describes a spiral that is neither tangent nor radial to the previous course and for which the direction of the curve is defined by its long chord.

In TPC's Traverse View, this spiral would have been entered by computing or recalling the PT (Point of Tangency) of the spiral , then entering any curve information such as radius or arc length which does not recompute the position of the PT.

Available Place Holders

<SPIRAL DEFINITION>, <SPIRAL COMBINED DIRECTION>, <SPIRAL LENGTH>, <SPIRAL CONCAVE DIRECTION>, <SPIRAL RADIUS BEGIN>, <SPIRAL RADIUS END>, <SPIRAL K> and <SPIRAL CENTRAL ANGLE>.

Available Nested Phrases

<BEGINNING OF SAID SPIRAL BEING>, <TO A POINT BEING>, <HAVING COORDINATES>, <HAVING GEODETIC POSITION>.

Typical Phrase

" to the beginning of a spiral concave to the <SPIRAL CONCAVE DIRECTION> having a beginning radius of <SPIRAL RADIUS BEGIN> and ending radius of <SPIRAL RADIUS END> constant of proportionality of <SPIRAL K> and a central angle of <SPIRAL CENTRAL ANGLE> and being subtended by a chord which bears <SPIRAL LONG CHORD DIRECTION> <SPIRAL LONG CHORD LENGTH><BEGINNING OF SAID CURVE BEING>; Thence <SPIRAL COMBINED DIRECTION> along said spiral , a distance of <SPIRAL LENGTH><TO A POINT BEING>"


<NEW SPIRAL DIRECTION LARGE>

The phrase describes a spiral that is neither tangent nor radial to the previous course and for which the direction of the spiral is defined by the direction of its PC (Point of Curvature) to its PR (Point of Radius).

In TPC's Traverse View, this spiral would have been computed by entering it's PC->PR direction and any additional curve information such as radius and spiral length which computes the position of the PT (Point of Tangency) of the spiral .

Available Place Holders

<SPIRAL PCPR DIRECTION>, <SPIRAL DEFINITION>, <SPIRAL COMBINED DIRECTION>, <SPIRAL LENGTH>, <SPIRAL CONCAVE DIRECTION>, <SPIRAL RADIUS BEGIN>, <SPIRAL RADIUS END>, <SPIRAL K>, <SPIRAL CENTRAL ANGLE>.

Available Nested Phrases

<SAID POINT BEING A>, <TO A POINT BEING>, <HAVING COORDINATES>, <HAVING GEODETIC POSITION>.

Typical Phrase

" to a point on a spiral , from which the radius point bears <SPIRAL PCPR DIRECTION><SAID POINT BEING>; Thence <SPIRAL COMBINED DIRECTION> a distance of <SPIRAL LENGTH> along the arc of said spiral concave to the <SPIRAL CONCAVE DIRECTION> having a beginning radius of <SPIRAL RADIUS BEGIN> and ending radius of <SPIRAL RADIUS END> constant of proportionality of <SPIRAL K> and a central angle of <SPIRAL CENTRAL ANGLE><TO A POINT BEING>"


<NEW SPIRAL DIRECTION FROM CUSP SMALL>

This phrase describes the transition which is a cusp (where a spiral, curve or line and spiral both point in the same general direction) from a spiral. curve or line to a spiral that is neither tangent nor radial to the previous course and for which the direction of the spiral is defined by its long chord.

In TPC's Traverse View, this spiral would have been entered by computing or recalling the TS (Point of Tangent tp Spiral) of the spiral , then entering any spiral information such as radius or spiral length which does not recompute the position of the PT.

TPC identifies a cusp as when the angle between the tangent bearing from the end of the spiral to the bearing of the line is greater than 90 degrees.

Available Place Holders

<SPIRAL DEFINITION>, <SPIRAL COMBINED DIRECTION>, <SPIRAL LENGTH>, <SPIRAL CONCAVE DIRECTION>, <SPIRAL RADIUS BEGIN>, <SPIRAL RADIUS END>, <SPIRAL K>, <SPIRAL CENTRAL ANGLE>.

Available Nested Phrases

<SAID POINT BEING>, <TO A POINT BEING>, <HAVING COORDINATES>, <HAVING GEODETIC POSITION>.

Typical Phrase

" to a point of cusp on a spiral concave to the <SPIRAL CONCAVE DIRECTION> having a beginning radius of <SPIRAL RADIUS BEGIN> and ending radius of <SPIRAL RADIUS END> constant of proportionality of <SPIRAL K> and a central angle of <SPIRAL CENTRAL ANGLE> and being subtended by a chord which bears <SPIRAL LONG CHORD DIRECTION> <SPIRAL LONG CHORD LENGTH><SAID POINT BEING>; Thence <SPIRAL COMBINED DIRECTION> along said spiral, a distance of <SPIRAL LENGTH><TO A POINT BEING>"


<NEW SPIRAL DIRECTION FROM CUSP LARGE>

This phrase describes the transition which is a cusp (where the spiral, curve or line and spiral both point in the same general direction) from a spiral, curve or line to a spiral that is neither tangent nor radial to the previous course and for which the direction of the curve is defined by the direction of its TS (Point of Tangent to Spiral) or CS (point of Curve to Spiral) to its PR (Point of Radius).

In TPC's Traverse View, this curve would have been computed by entering it's PC->PR direction and any additional curve information such as radius and arc length which computes the position of the PT (Point of Tangency) of the curve.

TPC identifies a cusp as when the angle between the tangent bearing from the end of the spiral to the bearing of the line is greater than 90 degrees.

Available Place Holders

<SPIRAL PCPR DIRECTION>, <SPIRAL DEFINITION>, <SPIRAL COMBINED DIRECTION>, <SPIRAL LENGTH>, <SPIRAL CONCAVE DIRECTION>, <SPIRAL RADIUS BEGIN>, <SPIRAL RADIUS END>, <SPIRAL K>, <SPIRAL CENTRAL ANGLE>.

Available Nested Phrases

<SAID POINT BEING>, <TO A POINT BEING>, <HAVING COORDINATES>, <HAVING GEODETIC POSITION>.

Typical Phrase

" to a point of cusp on a spiral , from which the radius point bears <SPIRAL PCPR DIRECTION><SAID POINT BEING>; Thence <SPIRAL COMBINED DIRECTION> a distance of <SPIRAL LENGTH> along the arc of said spiral concave to the <SPIRAL CONCAVE DIRECTION> having a beginning radius of <SPIRAL RADIUS BEGIN> and ending radius of <SPIRAL RADIUS END> constant of proportionality of <SPIRAL K> and a central angle of <SPIRAL CENTRAL ANGLE><TO A POINT BEING>"


<COMPOUND SPIRAL >

This phrase describes two spirals that are tangent to each other and also have the same curve direction.

Available Place Holders

<SPIRAL DEFINITION>, <SPIRAL COMBINED DIRECTION>, <SPIRAL LENGTH>, <SPIRAL CONCAVE DIRECTION>, <SPIRAL RADIUS BEGIN>, <SPIRAL RADIUS END>, <SPIRAL K>, <SPIRAL CENTRAL ANGLE>.

Available Nested Phrases

<SAID POINT BEING>, <TO A POINT BEING>, <HAVING COORDINATES>, <HAVING GEODETIC POSITION>.

Typical Phrase

" to a point of compound curvature<SAID POINT BEING>; Thence <SPIRAL COMBINED DIRECTION> a distance of <SPIRAL LENGTH> along the arc of said spiral concave to the <SPIRAL CONCAVE DIRECTION> having a radius of <SPIRAL RADIUS> and a central angle of <SPIRAL CENTRAL ANGLE><TO A POINT BEING>"


<REVERSE SPIRAL >

This phrase describes two spirals that are tangent to each other, but who's spiral directions are opposite.

Available Place Holders

<SPIRAL DEFINITION>, <SPIRAL COMBINED DIRECTION>, <SPIRAL LENGTH>, <SPIRAL CONCAVE DIRECTION>, <SPIRAL RADIUS BEGIN>, <SPIRAL RADIUS END>, <SPIRAL K>, <SPIRAL CENTRAL ANGLE>.

Available Nested Phrases

SAID POINT BEING>, <TO A POINT BEING>, <HAVING COORDINATES>, <HAVING GEODETIC POSITION>.

Typical Phrase

" to a point of reverse curvature<SAID POINT BEING>; Thence <SPIRAL COMBINED DIRECTION> a distance of <SPIRAL LENGTH> along the arc of said spiral concave to the <SPIRAL CONCAVE DIRECTION> having a radius of <SPIRAL RADIUS> and a central angle of <SPIRAL CENTRAL ANGLE><TO A POINT BEING>"


<SPIRAL TO LINE FROM CUSP>

This phrase describes the transition which is a cusp (where the spiral and line both point in the same general direction), from a spiral to a line.

TPC identifies a cusp as when the angle between the tangent bearing from the end of the spiral to the bearing of the line is greater than 90 degrees.

Available Place Holders

<LINE DIRECTION>, <LINE LENGTH>.

Available Nested Phrases

<SAID POINT BEING>, <TO A POINT BEING>, <HAVING COORDINATES>, <HAVING GEODETIC POSITION>.

Typical Phrase

" to a point of cusp<SAID POINT BEING>; Thence <LINE DIRECTION>, a distance of <LINE LENGTH><TO A POINT BEING>"


<SPIRAL TO RADIAL LINE>

Note: not currently implemented

This phrase describes the transition from a spiral to a line that is radial to that spiral where radial defines the bearing from the point of radius for the end of said spiral to the end point of said spiral at which said line commences.

Available Place Holders

<LINE DIRECTION> and <LINE LENGTH>.

Available Nested Phrases

<TO A POINT BEING> and <REFERENCE DIRECTION>.

Typical Phrase

"Thence <LINE DIRECTION> radial to said spiral, a distance of <LINE LENGTH><TO A POINT BEING>"


<LINE TO RADIAL SPIRAL >

Note: not currently implemented

This phrase describes the transition from a line to a spiral where the direction of the spiral at the endpoint of the line is 90 degrees left or right. You can also think of the extension of said line passing through the point of radius of the spiral .

Available Place Holders

<SPIRAL DEFINITION>, <SPIRAL COMBINED DIRECTION>, <SPIRAL LENGTH>, <SPIRAL CONCAVE DIRECTION>, <SPIRAL RADIUS BEGIN>, <SPIRAL RADIUS END>, <SPIRAL K> and <SPIRAL CENTRAL ANGLE>.

Available Nested Phrases

<BEGINNING OF SAID SPIRAL BEING> and <TO A POINT BEING>.

Typical Phrase

" to the beginning of a spiral radial to said line<BEGINNING OF SAID SPIRAL BEING>; Thence <SPIRAL COMBINED DIRECTION> a distance of <SPIRAL LENGTH> along the spiral concave to the <SPIRAL CONCAVE DIRECTION>, having a beginning radius of <SPIRAL RADIUS BEGIN> and ending radius of <SPIRAL RADIUS END> constant of proportionality of <SPIRAL K> and a central angle of <SPIRAL CENTRAL ANGLE><TO A POINT BEING>"


Related Topics

Spirals
Legal Descriptions
Legal Description Phrases
Nested Phrases
Legal Description Dialog

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.