|
If you plan on using the profile for analysis or measurements, you will probably want to include a grid.
•Choose Insert | Grid to display the Grid dialog.
•Select the options shown here then choose OK. The Drawing View draws the grid with your grid settings.
Spend some time with the Grid dialog options. You'll find options to draw and label the grid just the way you want.

Extending the Grid
By default, the Drawing View draws the grid to the extents of the profile. If you want to work beyond the profile, you can extend the grid.
•Position the cursor over any grid line until the status bar displays Grid.
•Right-click and choose Properties
•Change the Right value to 200
•Change the Top value to 10
•Choose OK

Note: If you want to extend the grid on the Left or at the Bottom, you must use negative numbers. Positive numbers in the Left or Bottom fields will move the grid up or right.
Hint: You may need to re-scale and re-position the drawing on the page to see the extended grid.
Related Topics
Profiles Stations and Offsets
Editions
Professional
|