The Circle command inserts a circle into the drawing using the current line type, line width and color of the Drawing View Format Bar.
•Select the mode you want to draw the text in - Paper Space or Survey Space.
•From the Format toolbar, choose the line type, width and color. You can change the properties of the line at any time, but you will save time by selecting them first.
•Choose Draw | Circle. The cursor will change to a tick (cross) indicating that Drawing View is looking for an insertion point.
•Press the [3] key to switch from a 2 Point to a 3 Point circle.
To cancel the command anytime before you finish, press the [Esc] key.
This command can be repeated. Press the [R] key to repeat the command after you choose Draw | Circle. After you place a text object you'll see the cursor remains a tick(cross) indicating that the Drawing View is ready for another insert point.
2 Point Circle
This command specifies and insert point and radius for a circle.
•Move the cursor to the insert point (center point of the circle). Notice that the status bar displays the location of the tick mark in both survey and paper coordinates. You can also snap on another object to pick the insertion point. Left click the mouse to choose the position you want.
•Move the mouse away from the insert point. TPC will redraw the circle so that it passes through the current mouse position. To specify an exact radius, hold down the left shift key and left click to display the Circle dialog box. Enter the radius in the circle dialog box and choose OK.
3 Point Circle
With this command, you specify any 3 points on the circumference of a circle and TPC computes the circle that passes through each of them.
•Move the cursor to the first point on the circle. Notice that the status bar displays the location of the tick mark in both survey and paper coordinates. You can also snap on another object to pick the insertion point. Left click the mouse to choose the position you want.
•Move the cursor to the second point and left click the mouse or snap to a position. TPC will redraw the circle so that it passes through the first and second points.
•Move the cursor to the third point and left click the mouse or snap to a position. As you move the cursor, TPC will redraw the circle so that it passes through the first and second points as well as the cursor.
3 Point Circle (1:42) - Learn how to draw a 3 point circle