Positioning a survey can be quite a chore in most CAD software. You have to be careful to move the borders of the drawing, not the survey itself, or you can change the coordinates of the drawing entities.
Moving the survey isn't a problem at all in the Drawing View. In fact, you'll wonder what all the fuss is about when others talk about moving the survey in their CAD software.
To Position the Survey in a Drawing
•Move the cursor over the survey so that it is not over a specific survey object. The status bar displays the name of the object that the cursor is over. When it displays "Survey" you are over the survey.
•Press the Ctrl key, then press the left mouse button and drag the survey to the desired location on the page. Drawing View draws a dashed rectangle around the extents of the survey, including any text, to show you where the survey will be placed.
•Release the mouse button and the Ctrl key. That's it.
TTPC stores the offset of the survey in inches from the center of the page. If you change page sizes, the offset from the center of the new page is the same. You will probably want to reposition the survey on the page.
This is an alternate method that allows you to pick a base point and destination point and displays a temporary offset line between the two during the command. Use this method for more exact placement of the survey on the page.
You will notice that objects like the north arrow and title block do not move with the survey. That's because these objects are Paper Space objects, not Survey Space objects. See Paper Space and Survey Space.
Panning and Zooming
If you are zoomed in, you can use the left mouse button to pan the drawing. The difference in the commands is that for panning, you do not use the Ctrl key.