For each table you use in TPC, you can specify the format of the table items in the Items group box in the Table Properties dialog.
Table Item References
When you place a drawing object in a table, TPC references the label on the object with a number like L1, L2, L3, etc for lines and C1, C2, C3 for curves. The reference label is drawn next to the line just like the line label would be if it wasn't in the table, and the reference label is included in the first column in the table. See Table Items.
One of the benefits of using TPC for your drawings is that TPC keeps track of all line and curve references for you - automatically. As you add or remove lines or curves from their tables. TPC checks all referenced lines and curves and renumbers the references as needed to insure that they are sequential. TPC also expands or contracts the table itself to make room for the items in the table. As such, you don't have to manually re-size the table.
The Point and Lot tables are unique in that in addition to creating references like P1, P2 for Points or T1, T2 for Lots, TPC can use the Point or Lot name as the reference. You will probably prefer this for the Point table and may want to consider it for the Lot table.
Retain Orientation of Original Label
With a few exceptions, table reference items do NOT adhere to the Traverse Drawing Settings that place labels Above, Below, Insert or Outside of the traverse lines.
You can retain the label orientation of the original label to orient the table label that replaces it.
•If the original label was aligned, the table label gets aligned also.
•If the original label was stacked and drawing with the stacked label orientation, the table label is drawn with the stacked label orientation also.
To do this, turn on [x] Retain Orientation of Original Label in the Table Properties dialog.
Font / Style
You can sets the character Font, size, and Style for the table item text.
Depending on the fonts used for the table title and column headers, the font and size you select here may control the size (height and width) of the table.
See Text Objects for more information on sizing text.
Prefix
Each table can and should have its own, unique, prefix that it uses to label the table items.
TPC uses the following prefixes for drawing tables.
•Line Table - L
•Curve Table - C
•Lot Table - T
•Point Table - P
Traverse Line Tables start with the prefix TL. You can change this so something else, but you will want to keep it unique.
All point tables use the Prefix P followed by the point label. Since point labels are always unique in TPC by definition, there is no need for a different prefix for a Traverse Point Table.
Note: Lot and Point tables only use a prefix when you include N for Lots and P for Points in their formats. Otherwise, they use the unique survey lot or point name for the table item.
Starting Number
Beginning with TPC 2022 R1, you can specify the starting number for a table (default = 1).
This is useful when you are using Traverse Tables, where each traverse can have its own table with an item prefix and starting number.