|
The stakeout report generates a cut sheet, showing cuts and fills for selected points.
The stakeout report compares the selected stakeout points (these points have either an @ symbol or an _ underscore in the point label, as in 12_1 or 12@1). The stakeout points are compared with their design points. For example, both 12_1 and 12@1 would be compared with point 12.
•From TPC Desktop’s main menu, choose Tools | Stakeout Report.
•From the Point and Traverse mangers, choose Tools, Reports, Stakeout Report.
•Select the options from the dialog, including specifying staked points.
•When you choose OK, TPC adds the report to the current Report View.
Example Stakeout Report
In the following example report, the user specified that staked points as having point labels 1000 greater than their associated design points. So staked point 1002 corresponds to design point 2.
TPC does not currently allow you to edit the format of this report.
[[ Stakeout Report ]]
Friday, November 12, 2021 14:05:54
Entire Survey
Point:2 nail
Design N:861668.96162 E:3972220.01425 Z:33.21
Staked N:861668.88600 E:3972219.99100 Z:34.19 1002, 7-25-2020 11:28
Difference N:-0.07562 E:-0.02325 Linear:0.08 Cut:0.98
Point:5 fnd 1/2" pipe
Design N:861739.80568 E:3972351.83891 Z:31.07
Staked N:861739.76300 E:3972351.89300 Z:36.17 1005, 7-25-2020 11:45
Difference N:-0.04268 E:0.05409 Linear:0.07 Cut:5.10
Point:466 EAC
Design N:861893.36823 E:3972230.66517 Z:36.00
Staked N:861893.36600 E:3972230.69400 Z:36.01 1466, 7-25-2020 11:08
Difference N:-0.00223 E:0.02883 Linear:0.03 Cut:0.01
Averages: Count=3 Horizontal=0.06 Vertical=2.03
Notice that point 5 was included, but it probably not a staked point. You’ll learn how to exclude this from the report.
Related Topics
Specifying Staked Points
Staking Out Points
Stakeout Report Command
Reports
Report View
Editions
Personal, Premium, Professional
|
