TPC 2026
TPC 2026

 

 

Navigation: Traverses >

Recomputing a Traverse

 

 

 

 

As you enter data in the Traverse View, or if you import raw data, TPC uses that data to compute the position of the side shots, foresights, offsets, etc. in the traverse. If you go back and edit a starting coordinate, a target height, a backsight point, etc. you can insure that the points in the traverse reflect the change by recomputing the traverse.

When TPC recomputes a traverse, it starts with the first point in the traverse, then proceeds down through the traverse points. When it finds raw data for a point, it uses the raw data to compute the point. If TPC encounters a point without raw data, it holds the coordinates of the point and proceeds on.


Recomputing Manually

There are times, however, when you will want to manually recompute the traverse. You should manually recompute when you:

•Change the coordinates of the starting occupied point.

•Change the coordinates or reference azimuth of the backsight.

•Have made changes in other traverses that affect control points used in this traverse.

When you manually recompute the traverse, TPC starts with the first point in the traverse and recomputes the position of each point in the traverse that has raw data associated with it. Adjusted points are recomputed, but protected points are not. TPC skips over points that do not have raw data and continues recomputing to the end of the traverse.

Recomputing a Single Traverse

•From the Traverse View, choose Tools | Recompute.

Recomputing Selected Traverses

•From the Traverses Manager choose Tools | Recompute Selected Traverses.

TPC recomputes the area, closure and precision for each selected traverse. This command insures that the traverse data displayed in the Traverses Manager is current. See Displaying Closure Data in the Traverses Manager.


Checking Raw Data

If you are unsure which points in the traverse have raw data, choose View | Display Raw Data. This mode displays just that data that was manually entered or measured from the total station. Choose View | Display Raw Data to return to the normal inverse mode of the Traverse View.


Sticky Adjustment

Recomputing a traverse has the same effect as Undo Adjustments. If the traverse has been adjusted in any way, recomputing the traverse undoes the adjustments.

The exception to this are the sticky adjustments.

Beginning with TPC Desktop 2011, TPC refers to Precision, Curvature & Refraction and Scale Factor as 'sticky' adjustments. You can apply sticky adjustments before balancing angles and coordinates. Sticky adjustments also remain in effect when you choose Tools | Recompute from the Traverse View. To turn them off, go to the Closure View and choose Tools | Undo Adjustments.


Computing Alignments

In TPC, if you create an alignment by entering centerline calls (distance, direction, curve/spiral data), you generally want to make a copy of that traverse, using the original to recompute the alignment if necessary and using the copy to insert additional points on the alignment, like stations, PC's, PT's, etc. See Horizontal Alignments.

If a traverse point has been designated as a PI point, TPC will not recompute it when the traverse is recomputed. This is because computations are based on the control point sequence of the traverse. Once the PI point inserts PC's and PT's into it's tangents, the control point sequence of the traverse is modified and the resulting recompute would produce the wrong results.


Related Topics

Traverse View
Displaying Raw Data

Editions

Personal, Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.