TPC 2026
TPC 2026

 

 

Navigation: Drawings > Drawing Objects > XReferences >

Unloading and Reloading XReferences

 

 

 

 

Unloading and Reloading are operations you might perform on an XReference that is NOT bound to the TPC drawing.

Unloading an XReference removes the referenced layers and objects from the drawing.  The XReference itself is still a part of the drawing, but you won't see it displayed in the drawing.

You will need to use the Drawing Data Manager to reload the XReference.


Unloading

To unload an XReference

•Right-click any XReference object in a drawing where it is displayed and choose XReference... | Unload.

•Or right-click any XReference in the Drawing Data Manager and choose Unload.

•The XReference will disappear from the drawing even though it is still part of the drawing.

If you were to save the survey after you have unloaded an XReference, the XReference is still part of the drawing and will be saved with the survey file.

To redisplay the XReference again in the drawing, you will need to Reload the XReference.


Reloading

To reload an XReference

•In the Drawing Data Manager, right-click the XReference and choose Reload.

•TPC will diaplay the XReference's layers and objects in the drawing.

You might also reload an XReference, even if there wasn't a detected change, just to make sure you have the latest version of the CAD file.


Automatic Reloading When a Survey File is Opened

If an XReference is loaded when a survey is saved, that XReference is automatically reloaded when a survey file is opened.

Since any XReferences stored with a drawing in the that file does not store any of the XReference layers or objects, the first time you open a TPC drawing with an XReference, the XReference must access the referenced CAD file and load those layers and objects into TPC's drawing.


Automatic Reloading

You can set the properties of an XReference to that it tracks updates in the referenced CAD file automatically or manually in the XReference Properties dialog.

If you set an XReference to update manually, you will need to Reload the XReference to get any changes.


Reloading After being Calibrated

If you calibrate an XReference, TPC stores the calibration with the XReference. If you later reload the XReference, either manually or automatically, TPC re-applies the calibration to the XReference.  You do not need to to re-calibrate the XRef to the survey.


Related Topics

XReferences
Binding an XReference
Blocks and Groups
Using Drawing View
Working with Drawing Objects
Drawing Commands
Calibrations

Editions

Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.