Select a traverse of Uncalibrated points with calibrated points as
•Pull down the list to select a traverse or use the [>] then left click anything drawing that was drawn by the traverse you want.
The traverse you selected, must be formatted with points in the calibrated coordinate system as side shots or embedded in point descriptions as follows.
Sideshots
Select a traverse that has the following point sequence
•any number of Uncalibrated points, entered as control points
•any number of calibrated points, entered as sideshots or included in the descriptions of the Uncalibrated points
In this example, GPS400 is followed by as sideshot to 404. When calibrated, GPS400 will be calibrated to 400.
GPS404, GPS405, GPS406 are Uncalibrated points that do not include calibrated sideshots. These are simply additional Uncalibrated points, that will not contribute to the calibration computation, but for which TPC will report residuals.
Point Descriptions
Select a traverse that has the following characteristics
•any number of Uncalibrated points, entered as control points or sideshots
•any number of calibrated points referenced in the point descriptions of the Uncalibrated points
In this example, the point description for GPS400 begins with #400, indicating that is to be calibrated to 400. This method has the additional advantage if the character used, like # in this example, can be specified for redundant least squares observations.
GPS404, GPS405, GPS406 are Uncalibrated points that do not reference calibrated points. These are simply additional Uncalibrated points, that will not contribute to the calibration computation, but for which TPC will report residuals.
Calibrating Assumed Coordinates
With total station surveys, you may have started in the field with assumed coordinates for one or more control points. Then back in the office, you will want to calibrated all the data you collected, based on those assumed coordinates, to the correct coordinate positions.