TPC 2026
TPC 2026

 

 

Navigation: Calibrating Data > Creating Calibrations >

Select point series from the CAD View

 

 

 

 

From the Create Calibration dialog, choose

Select Uncalibrated point sequence from the CAD View, then select their calibrated positions in the current drawing

Select a series of points in the CAD View, then select the corresponding series of points in the Drawing View.

This option if helpful when the coordinate system of a CAD file places the CAD objects a long way away from your survey data.  You might have a design that was engineered at coordinates 0,0 and be required to place it into your State Plane survey with coordinates that are considerably larger.  This option allows you to do this quite easily.

 

Calibrating From the CAD View (7:17) - When your CAD coordinates are very different from your survey coordinates, you can select a series of points in both the CAD View and the Drawing View to create your calibration.


CAD View Snap Mode

This command places the CAD View in Snap Mode.  As you move the cursor over a snappable location, the cursor changes shapes to indicate the type of snap a Left Click will create.


UnSelecting Points

If you select the wrong point, you can unselect it.

•Just Left Click the same snap object you selected earlier

•If you correctly selected it, the symbol and label for the object you unselected will disappear

•Continue selecting points as normal


Related Topics

Calibrating Data
Creating Calibrations

Editions

Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.