|
The Traverse Summary provides information about the traverse. Think of this like a snap shot of the traverse.
Closure Type
Displays the current closure type: Closed loop, Closed Point-to-Point, Open. If you have not yet select a closure type for a traverse, TPC selects a closure type for you based on the relative error (how close the traverse is to closing on itself).
Having TPC choose closed loop traverses correctly is important for assessment work since only closed loop traverses compute an area and error of closure automatically.
•To set the Closed Loop limit, choose Tools | Program Settings | Limits.
•Enter the percentage you want in the Closed Loop field in the Tolerance section.
Closing Points
Points From and To are the number of points included in the length and area computations. This is particularly useful when summarizing a segment of a traverse using the closing points.
Note: By definition, the first and last points in a closed loop traverse count for only one point.
Horizontal Distance and Slope Distance
The horizontal distance and slope distance are computed from the initial point to the closing point.
Note: Side shots are not included in the length computations.
Area
TPC first determines if the traverse direction is clockwise or counter clockwise. Then TPC looks at each curve in the traverse and automatically adds/subtracts the segment area of the curve to the traverse, depending on which direction the curve is going.
The area summary pertains only to Closed Loop traverses.
Note: If you are working with a Closed Loop traverse and the traverse does not close, TPC supplies a temporary course (line) from the actual closing point to the correct closing point in order to compute the area.
Distance and Direction Types
The Closure View displays data based on the Distance and Direction types selected for that traverse. The types are listed immediately under the Closure View heading at the top.
Distance Units
The distance units displayed in the Closure View are determined by the traverse units. You set these in the Advanced tab of the Traverse View Format dialog.
Related Topics
Checking Traverse Closure Closure View Area
Editions
Personal, Premium, Professional
|