TPC 2026
TPC 2026

 

 

Navigation: Using GPS / GNSS > Emlid (CSV) > Using emlid Point Codes >

Using emlid Codes in TPC

 

 

 

 

When you import emlid CSV files into TPC, the emlid feature codes come into TPC as point Attributes. 


Using Attributes for Point Codes

You can then tell TPC to look for Point Codes in the point Attributes instead of the point Description. See Using Point Codes in the Field.

 

Point Codes in Attributes (4:18) - Point Codes can now be accessed from point attributes as well as point descriptions.


Incrementing Emlid Line Codes

As you use Line type codes in an emlid Flow project, emlid increments the code with a number each time to stop a code line and restart it.

In the example shown here, the sidewalk code SW was used three times for three separate edges of sidewalk.

Codes SW1, SW2 and SW3 all code the edge of sidewalk, but they were created by three separate sidewalk lines in emlid.

When you use Point Codes in TPC to sort points into traverses based on their codes, TPC will create a separate traverse for each SW code, creating the three separate lines in the drawing.  See Creating Traverses From Point Codes.

If you want to combine all SW codes into a single traverse, you can specify an alias for each SW code.  See Using Point Code Aliases.


How TPC Renders emlid Feature Codes

Emlid does not provide default symbols and line types to use for their feature codes.  So TPC has added these to each of the emlid feature codes when you import them from the Emlid Feature Codes.pct file.

See How TPC Renders emlid's Default Point Codes.


Related Topics

Emlid CSV
emlid Point Code Library
Creating Traverses From Point Codes
Using Point Code Aliases
How TPC Renders emlid's Default Point Codes
 

Editions

Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.