|
When you import GPS/GNSS points, you can get a detailed report of what is imported.
Sample
[[ Import:2023-1.csv ]]
Monday, April 24, 2023 10:41:57
C:\Users\JohnBalcom\Traverse PC\R&D - General\Test Cases\Filters\GNSS\Emlid\
All units (coordinates, distances and heights) are Feet unless marked otherwise.
Transform coordinates using NAD 83 (2011)
epoch 2010.00 CONterminous United States (CONUS), Alaska and US territories in the Caribbean
Oregon South (3602)
Reading Latitude and Longitude as Degrees
Assuming unique point labels (speeds up import)
Solutions: Fixed
h7 Desc:
Lat=44.0437884dN, Lng=124.0807210dW, Ht=182.29
Y=4168.283 X=4759.289 Z=0.00
Origin: Global
Antenna ht=6.34 Feet Tilt Angle: 0.8 degrees
Solution=FIX
RMS: Y=0.036 X=0.035 Z=0.050 Horiz=0.050 Feet
PDOP=1.90 GDOP=2.20
Time=2024-05-29 12:57:12.0 UTC-07:00
Sample size=51
Satellites=8 GPS=6 GLONASS=2 Galileo=0 BeiDou=0 QZSS=0
Base
Base1 Y=-17459.123 X=-3270.513 Z=178.958 Feet
Base1 Lat=43.9836020dN Lng=124.1076920dW Ht=-19.83 Feet
Baseline Dist=23060.314 Feet Mile=4.367
CRS=NAD83(2011) / Oregon South (6) + NAVD88(GEOID18) height
The report starts with section data [[ data ]] that tells you assumptions TPC is making about the data format. Then each imported point is reported.
This sample shows a point 13 that was imported and changed to point 413.
The definitions of each value included in the GPS/GNSS Data definitions.
Related Topics
Using GPS/GNSS
Editions
Premium, Professional
|