|
|
The following options are commonly available export options for many of the data types TPC supports. Some data types will also have their own specific settings.
Raw Data
If you turn this option on when exporting a RAW or RW5 file, TPC includes TR and SS records for traverse points with raw data. If a traverse point does not contain raw data, no record is written for it.
Notice in the lines shown here the TPC has included a SS record for each SP record. If you do not turn on this option, you will get just the SP records.
JB,NM,DT5-9-1997
MO,AD0,UN0,SF1.0000000,EC0,EO0.0
OC,OPCS2,N 991.3893,E 1246.8972,EL101.3618,--FND LANE COUNTY 5/8 W/YPC NE ABEL & SWANK
SP,PNCS9,N 999.4689,E 999.9827,EL102.6254,--FND WOBBE 5/8 @ NW 7-11
BK,OPCS2,BPCS9
LS,HI5.120,HR4.720
SS,OPCS2,FPCS10,AR137.5639,ZE93.4505,SD13.9050,--FND 1/2" IRON ROD
SP,PNCS10,N 981.0871,E 1256.1916,EL100.8520,--FND 1/2" IRON ROD
SS,OPCS2,FP1,AR245.4908,ZE90.2110,SD116.8000,--BLDG SW CORNER
SP,PN1,N 943.5464,E 1140.3478,EL101.0426,--BLDG SW CORNER
SS,OPCS2,FP2,AR213.1407,ZE92.3444,SD128.5658,--BLDG SE CORNER
SP,PN2,N 883.9624,E 1176.5044,EL100.6970,--BLDG SE CORNER
SS,OPCS2,FP3,AR229.3835,ZE90.2010,SD107.6200,--BLDG INTERIOR CORNER
Convert Coordinates
Use this option to convert exported coordinates (y,x,z) from one type to another. This can be metric to imperial, imperial to metric, grid to ground, ground to grid, etc..
A copy of TPC's coordinates for each exported point are first converted to the desired format, then exported to the file. As a result, you will see the exported coordinates only in the exported file. This conversion can usually be selected in the Settings dialog for the type you are exporting, like the ASCII Export Settings shown here.

Geodetic survey
For surveys like PLSS, that are entirely geodetic, TPC's coordinates are on a projection grid, like state plane, defined the the survey's CRS. To export side or ground coordinates, you will need to convert them from what TPC calls Grid to Ground.
Local survey
If your survey does not have a CRS, you are working in a local grid for that site. These local grids often use starting coordinates of 10000, 10000 or 0,0. In this case, your only option is to export local site or ground coordinates.
Surveys that use both local and geodetic
We used the word generally above, because you can have a survey in TPC that uses a CRS to relate a few GNSS control points to your ground survey, but otherwise uses ground coordinates for all the points. This is typical of boundary surveys or small subdivisions that do not cover a lot of area and have few geodetic constraints.
In this case, you will need to select the appropriate conversion for the coordinates you are exporting.
Point Label Modifier
Use this field to modify exported point labels.
Lets say that you have used points 10,000 and above for the design of your projects second phase. You could modify the exported point labels with -10000, creating point number that are easier to use in the field but which can still be associated with a design point.
Enter a prefix
Enter a prefix you would like to begin each export point with. For example, if your point label modifier is 'TOPO-' and your exported point labels are 1,2,3,... the resulting points will be TOPO-1, TOPO-2, etc.
Enter a placeholder *
Use an asterisk (*) to embed the exported point labels inside the point label modifier . For example, if your point label modifier is 'GS*ORG ' and your exported point labels are 1,2,3,... the resulting points will be GS1ORG, GS2ORG, etc.
Enter a + or - value
Use + or - to add or subtract a value to each point label. For example, if your point label modifier is +1000 and your exported point labels are 1,2,3... the resulting points will be 1001, 1002, 1003.
TPC will also splid any exported label into a prefix, value and suffix. So if your point label modifier is +1000 an exported point label of GPS1 will be modified to GPS1001, 120A will be modified to 1120A, EAC1A will be modified to EAC1001A and so on.
Latitude/Longitude Format
These fields determine the format TPC uses to export latitude and longitude, if you have specified them in the Format field above and they are supported by this export type.
Select the format option you want from the pull down list.
Clean
Turn on [x] Clean to remove an special character formatting, leaving just numeric values.
So instead of TPC writing -127.12345W for degrees latitude west, TPC will write just -127.12345.
See Latitude & Longitude Formats.

Open and Save Header Definitions
If you modify any header definitions in a dialog, you can save them. Or you can open any saved header definition file to update the header definitions in this dialog.
See Managing Header Definitions.

Related Topics
Exporting Survey Data Latitude & Longitude Formats Managing Header Definitions
|
|