TPC 2026
TPC 2026

 

 

Navigation: Sharing Data (Importing / Exporting) > Sokkia SDR >

SDR Import Settings dialog

 

 

 

 

(also Pentax / Trimble)

These settings are also used for the Pentax PTS 600 (SDR) format and Trimble DC10.7 format.

See Import Settings for settings not shown here.

Protect Imported Coordinates

Use this option to protect the position record (08KI and 02) coordinates as they are imported. If you do not protect the coordinates (default), they are recomputed by the raw data that was imported.

When an imported point matches an existing point

Use this option to update existing points in the survey with the data being imported. See Import Matching Points.

Include Notes

Insert comment records (13) into the traverse as a Note record.

Add Stored Points to Traverse

Use this option to create a traverse points for each stored point (08KI) being imported. If this option is off (default), stored points are added to the survey and therefore can be accessed through the Points Manager, but are not added to the traverse created by the import.

Treat First Observation as Backsight

Use this option to treat the first observation (09F1) after a station record as a backsight observation (default). Many of the early SDRs like the 20 and 22 did not force the user to enter a backsight record (07). They assumed that the first observation recorded after a station record would be to the backsight. This option does not treat the first observation as a backsight if the station is followed by a backsight record (07).

Combine BS, OP and FS

Use this option to eliminate redundant points in the traverse created from the import.

The SDR file format includes the following records for each foresight (02-station, 07-backsight or 09F1-backsight and 09F1-foresight). This results in the following traverse point sequence:

1 OP

99 BS

2 SS

2 OP

1 BS

3 SS

3 OP, etc.

This option reduces this sequence to the following:

1 OP

99 BS

2 FS

3 FS, etc.

This format is much cleaner to work with and is typical of how the traverse would look if you had entered the data manually.

Details

Creates a detailed report in the Message View, showing how the file was converted. You will also see the following:

MC records that are ignored.

Unsupported records - displays the entire record

Every station (02) and backsight (07) record, even if you choose to combine them.

All comments (13), even if you choose not to include notes in the traverse.

Apply Prism Constant if Found

Adds any prism constants found in the file to the slope distances.

Many of not most total stations correct for the prism constant before they report or store a shot to a target. In this case, you will want to turn this option off (default). If your total station does not correct for the prism constant and includes it in the imported data you can turn this option on to apply it.

Apply PPM if Found

Beginning with TPC Desktop 2025, the Trimble DC10.70 import can compute and apply PPM corrections.

They are reported in the Details as seen in this example.

SS:306  Desc:RBF

  SD:592.0272  ZA:91.19639000d  HC:189.44091000d  HT:5.00

  Applied prism offset 0.072,  Applied PPM -0.00848

 

Draw Control Point Chain

Turn this option on to draw the control point chain more accurately in the drawing.

When this option is on, TPC does two things with your imported traverses.

•It inserts a Gap prior to any occupied point if the following BS record does not match the preceeding occupied point.

This forces TPC to remove any control lines where you didn't physically occupy a sideshot or foresight you just shot from the last control point (a typical ground traverse ahead). If you are doing a site or topo survey, where you are occupying point you shot several setups back, this may give you a better picture of your survey layout.

•Turns on the [x] Draw Backsights (using Control Point Settings) option in the Traverse Drawing Settings, Advanced tab.

This forces TPC to draw a control line from any occupied point to its backsight, giving a more complete picture of what you did at each occupied point.


Related Topics

Sokkia SDR
 

 

 

 

Copyright © 2026 Traverse PC, Inc.