TPC 2026
TPC 2026

 

 

Navigation: Sharing Data (Importing / Exporting) > Importing Survey Data >

Import Settings dialog

 

 

 

 

The following options are commonly available import options for many of the data types TPC supports.  Individual data types may have additional options.

 

Standardized Import Settings (3:38) - We look at turning on [x] Details and [x] Create Drawing of Import for a Pacsoft import.

This example is for the emlid GNSS CSV import.  Not all options discussed below are shown here.

 

Protect Imported Positions

Many data types include coordinates or geodetic positions for the points being imported. Use this option to protect these imported coordinates and geodetic positions.

When turned on, protects the imported coordinates or geodetic position. See Protecting Points.

When this option is off (default), they may be recomputed by the raw data that was imported.

Include Notes

Imported comment records are converted into traverse Notes. TPC inserts a Note point for each comment and places the comment in the Description column of the Traverse Views.

Add Stored Points to Traverse

Many data types include stored point and their coordinates or geodetic positions. These points are typically then used elsewhere in the imported data as occupied points or backsights. If you started the job on the data collector by exporting points from Traverse PC or some other surveying software and transferring those points to the data collector, the data collector will probably export them back out as these stored points.

Use this option to create a traverse point for each stored point being imported.

If this option is off (default), stored points are added to the survey and therefore can be accessed through the Points Manager, but are not added to the traverse created by the import.

Warning: When importing raw ground traverse data, like angles and distances, you may need to turn this option Off to get the correct OP, BS, FS sequence, especially when angle sets are involved.

Details

Creates a detailed report in the Message View, showing how the file was converted. You will also see the following:

•All instrument setups, including backsight, instrument and target heights

•Matching point conflicts and how they were resolved

•Duplicates that were relabeled

•Coordinates that were converted

•For GPS/GNSS

•The imported geodetic position and meta data

•The CRS coordinates computed from each imported geodetic position

•For ground traverses

•Every station and backsight record, even if you choose to combine them

•All instrument and target height records

•All comments, even if you choose not to include notes in the traverse

•Any automatic rotation and translation

Show Unsupported Records

Turn this option on to show unsupported records. TPC does not read the individual observations in a horizontal angle set for this format. If you don't want these to show up as unsupported records, turn this option off.

Create Drawing of Import

Turn this option on to create a drawing showing the imported data. Once you've looked at the drawing to confirm the data you imported, you can always delete the drawing.

Reference Points in Descriptions

Turn this option on to include =[existing point label] in the descriptions of  import points that get relabeled because TPC found an existing survey point with their original label.

For example, if  point 1 is imported, but TPC finds an existing survey point labeled 1, the imported point must be relabeled to something like 1:1. If this option is turned on, TPC places =1 in the description of imported point 1:1.

Convert Coordinates

When you import coordinates, you can convert them from one type to another.  You can also convert them after they are imported, but for workflows you do often, converting on import can be a simple solution.

The details report will include the imported coordinates and the coordinate values TPC converts them to. 

See Converting Coordinates On Import.

Latitude/Longitude Format

Select one of the options for how the latitude/longitude data you are importing is formatted.  See Latitude & Longitude Formats.

When an imported point matches an existing point

When an imported point matches an existing survey point, you can tell TPC to 1) create new (imported) points with a unique point labels, 2) use the matching existing survey point without updating it or 3) use the existing matching point and updated it from the imported data.

You control this with the option you select from a pull down list. See Importing Matching Points and Specifying Redundant GNSS Observations.

Point Label Modifier

Use this field to modify imported point labels, like adding 1000 to each import point label.

You will generally do this to create unique points from the imported data.

See Modifying Imported Point Labels.

Label & Next Label

Some import files may not contain point labels.  This sometimes happens with ASCII files that include just coordinates and descriptions, but no labels.

Use these fields to tell TPC how to label the incoming points by specifying a starting number or label.  As each new point is imported, TPC will then increment that point label so that it is unique.

To use the next available point numbers

•enter the starting number you want to use and click Next Label

•if that number is already used in the survey, TPC will increment it until it finds a number that has not been used

To use alpha numeric point labels

•enter a starting label like T1-C

•if that label has already been used, TPC will increment it to T2-C, T3-C, etc. until it finds a label that has not yet been used

If you enter a label and it doesn't change when you click Next Label, that means the label you entered is unique to this survey.


Ground Traverse Options

When you import ground traverse data (angles, distances, occupied points, backsights, etc.), you can tell TPC how exactly to handle the data.  See Import ground Traverse Settings.


Related Topics

Importing Survey Data
Exporting Data
Importing Matching Points
Specifying Redundant GNSS Observations
 

 

 

 

Copyright © 2026 Traverse PC, Inc.