|
This dialog is where you select a Site Calibration for your survey.
When you open the dialog, the current Site Calibration is displayed in the pulldown list at the top of the dialog. If no Site Calibration has yet been selected for this survey, TPC will display None.cal.
You can use an existing calibration or create a new one.
Select a Site Calibration
Select the calibration you want to use from the pull down list. The calibration you select will become the survey's Site Calibration when you close this dialog.
Click the folder icon at the right side of the list to open the survey's file folder and display all the calibrations that have been used by this survey. Then select the calibration you want to use.
Browse Default Folder
The default folder is the survey's folder. This button allows you to select a calibration from another survey or a shared folder, then return to the survey's calibrations for selection.
Preview
Opens the currently selected calibration in a word processor.
Create Calibration
Create a new calibration to use for the Site Calibration. TPC will open the Create Calibration dialog where you can select the method to use when creating the new calibration.
Changing Site Calibrations
To change to a different Site Calibration, just select the calibration you want from the pulldown list. When you close the dialog, TPC will search the survey for any data that was calibrated with the old site calibration, and recalibrate it to the new one.
Apply Site Calibration to
Select the data you want to apply the Site Calibration to.
Geodetic Points
These are points that hold their geodetic position (LLh) and compute coordinates as needed for COGO, drawing, etc. Without a site calibration applied, these points would compute a coordinate based on the survey's CRS (Coordinate Reference System).
Related Topics
Calibrating Data
Editions
Premium, Professional
|
