TPC 2026
TPC 2026

 

 

Navigation: Traverses > Adding Points to a Traverse >

Add Points To Traverse dialog

 

 

 

 

Use this dialog to create a new traverse or select an existing traverse to add points to.

It is available in both the Point Manager and Traverse View. A similar command is available from Drawing View.


New Traverse vs Existing Traverse

You determine whether or not TPC creates a new traverse by whether or enter a new traverse name or select an existing traverse name from the Name field in the dialog.

The title of the dialog indicates whether you are creating a new traverse or using an existing traverse.

Add points to New traverse - your actions will create a new traverse and add these points to it.

Add points to Existing traverse - your actions will append these points to an existing traverse.

The buttons at the bottom of the dialog also indicate whether or not you are creating a new traverse.

Insert - TPC displays the Insert pulldown and () Before and () After buttons when you are creating a new traverse. See descriptions below.

OK - TPC displays the Ok button when you are adding points to an existing traverse.


To create a new traverse

Enter the name of the new traverse in the Name field. TPC will let you know if the name you entered is already used for another traverse. You can then choose to use the existing traverse or re-enter the name for the new traverse. You can also select an existing traverse then modify the name to create a new traverse.

To add points to an existing traverse

Expand the Name list and select an existing traverse from the list or enter an existing traverse name and when prompted, tell TPC you want to use it. The points will be appended to the end of the existing traverse.


Name

Use this field to enter the name of the new traverse you want to create or select an existing traverse from the list.

Increment name for next traverse

Turn this toggle on to increment the traverse name the next time this dialog is opened. If you create a traverse named Lot 1, this dialog will display the traverse name Lot 2 the next time it is opened. You don't have to use the incremented name if you don't want it. You can always enter any traverse name you want at any time.

Insert

When you enter a traverse name that doesn't already exist, TPC creates that traverse when you choose OK. This pulldown determines where TPC inserts the new traverse.

The pulldown displays all traverse groups along with the number of traverses in that group followed by all the traverses in the survey.  Displaying the groups allows you to explicitly select the group you want to add a new traverse to.

Select a Traverse

Select the traverse you want to insert the new traverse next to, then choose () Before or () After to insert the new traverse before or after the traverse you just selected.

Select a Group with Traverses

All groups display the group's traverse count as (count) appended to the group name.

If you select a group that already contains traverse, TPC expands that group to show its traverses, allowing you to select one of those group traverses.

Once you have epanded a group, you can choose All Traverses... at the top of the list to collapse the group and redisplay group names and traverses.

Select an Empty Group

If you select an empty group, TPC will add the new traverse to that group.  The () Before and () After buttons dissappear, indicating that the new traverse will simply be added to the selected group.

Include traverse groups

Turn this option On (default) to include traverse groups in the Insert pulldown list, as described above.

Turn this option Off to display just existing traverses.

Traverse View Format

Select a format from the pull-down list. The list includes the pre-defined formats provided by Traverse PC, as well as any formats you have created. Choose the format that is best suited to the type of traverse you are starting.

The traverse will begin with an occupied point, followed by a backsight, foresight or sideshot, depending on the traverse format selected.

Select the edit button [...] next to the format list to display the Traverse Format dialog and further edit the traverse format. This action further modifies the format of the new or existing traverse but it does NOT modify the format you selected from the Format list.

You modify the formats in this list from the Traverse Format dialog.

Traverse Drawing Settings

Select Traverse Drawing Settings for this traverse from the pull-down list. The list includes the pre-defined settings provided by Traverse PC, as well as any user settings you have created.

Select the edit button [...] next to the Settings list to further edit the traverse settings. This action further modifies the traverse drawing settings of the new or existing traverse but it does NOT modify the settings you selected from the Settings list.

Some settings, like Symbols Only, are designed to be edited. This predefined setting draws a point symbol without any lines. You will edit it to select the symbol you want along with its color and size.

Drawing Options

Share current drawing - this option keeps the current drawing open. If you also select the Set Tag option, points you add to the new traverse are added to the current drawing. If you do not set the tag of this traverse, the current drawing remains open as a reference.

Create temporary drawing - creates a new, temporary drawing for this traverse. When you close the traverse view the temporary drawing is discarded.  See Temporary Drawing.

Delineate traverse - Selects this traverse as the delineated traverse in Drawing View.

Set Tag - Tags this traverse in the Traverses Manager, in effect, adding it to the current drawing.

State

Select a traverse state from the pulldown list.

New Traverse Point Options

This group of options is available only when the Add Points to Traverse command is executed from a Traverse View. They determine how the points are copied from the source traverse to the target traverse.

Copy any raw data to new points - turn this option on to copy any raw data in the highlighted points to the same points in the new traverse.

Convert to control points - turn this option on if the traverse you are creating draws a feature like a foundation or vegetation line. The points you are selecting in the source traverse may be side shots but in the new traverse, they will be control points that draw the feature you want in the drawing.

OK

Adds the points to the selected traverse. If you specified a new traverse, TPC will create the traverse then add the points. If you specified an existing traverse, the points will be appended to the end of that traverse.

Cancel

Cancels this command.


Related Topics

Formatting the Traverse View
Traverse View Formats
Adding Selected Points to a Traverse
Traverse View 
Traverse Groups

 

 

 

Copyright © 2026 Traverse PC, Inc.