TPC 2026
TPC 2026

 

 

Navigation: Surfaces > Surface Exclusions >

Getting Exclusions from Existing Traverse command

 

 

 

 

If you have a traverse for which you do not want contour lines to run through it, you can exclude the surface triangles within that traverse.

This is quite common when you want to show an existing building along with a surface. If we know or assume that the building is level, you may not want contour lines running through it.

 


To create an exclusion from a traverse

•Select one or more traverses in the Traverses Manager, then in the Exclusion dialog, choose Get.

•In the Drawing View, right click a contour or tin line and choose Surface Tools, Exclusions, Get Exclusions From a Traverse, then left click that traverse in the drawing.


If the Traverse is Not Already Included in the Surface

If the traverse points are not already included in the surface source, the surface triangles will not exactly match the traverse and neither will the exclusions.

Beginning with TPC Desktop 2024 (June BETA), TPC will check to see if the traverse points are already in the surface.  If not, it will prompt you to add them and recompute the surface triangles so they match the traverse.

 

Traverse Exclusions for Traverses Not Already In a Surface (2:53) - We've automated steps you could have done manually to create surface exclusions that exactly match a traverse, like a building pad.

In this video, the traverse points were already at elevation.  But if they weren't, you could

•translate the traverse to the desired elevation. See Translating.

•move the elevations of the traverse points to the existing surface.  See Move Survey Point Elevations to Surface command.


Locked Surfaces

You may get warnings that your surface is locked, and your data is reverted to what it was originally.

Click here for more info about surface locking and how to change it.


Excluding More Than One Traverse From a Surface

When a traverse needs to add its points to the surface before excluding it's triangles from the surface, it has to unlock the surface in order to recompute the TIN (triangles).  If the TIN was locked to start with, TPC relocks the TIN when it is done, but you will have lost any other exclusions in the process.  See Editing Surface Exclusions.

Once the traverse points have been added, and the TIN has been recomputed and locked, you can add or remove exclusions without recomputing the TIN. 

So if you have multiple traverses with points that are not in the surface, you will want to use this command for each of those traverses, adding point and recomputing the TIN for each one, then go back and edit the exclusions, using this same command or other methods.  At that point, the TIN will not be recomputed and will retain your selected exclusions.


Related Topics

Removing Exclusions in a Traverse
Surface Exclusions
Exclusions Dialog
Get Exclusions From a Traverse
Translating
Move Survey Point Elevations to Surface command

Editions

Premium, Professional

 

 

 

Copyright © 2026 Traverse PC, Inc.